Laserfiche WebLink
5TATE OF COLORADO <br /> DIVISION OF MINERALS AND GEOLOGY <br /> Department of Natural Resources <br /> 1 313 Sherman St., Room 215 <br /> Denver,Colorado 80203 <br /> Phone:(303)866-3567 <br /> FAX:(303)832-8106 <br /> DEPARTMENT OF <br /> NATURAL <br /> DATE: February 16, 1996 RESOURCES <br /> Roy Romer <br /> TO: All Bidders on the GEC/East Pit Maintenance Project Governor <br /> James S.Lochhead <br /> Executive Director <br /> FROM: John Nelson, Division of Minerals and Geology Michael B.Long <br /> Division Director <br /> RE: Amendment #1 to PKA-6-1010 <br /> Thank you for attending the pre-bid meeting on February 15, 1996. The following clarifications <br /> and amendments should be noted and incorporated into the special conditions and project work <br /> description. <br /> Special Conditions <br /> 1. Time of Completion: The time of completion for this project is 20 working days after <br /> receipt of the Notice to Proceed. This includes five (5) days mobilization time. <br /> 2. Project Date: The date for scheduled construction is between March 11, 1996 and <br /> April 5, 1996. <br /> Project Work Description <br /> The individual work descriptions of the bid document are modified to the extent outlined below. <br /> Item 1. Chen's Hill ditch, uphill from the gate will be constructed "to fit between the hill <br /> and road", which will be as wide as possible, but not as wide at the 10 ft. x 3 ft. <br /> V-ditch shown in Drawing 1. <br /> Item 4. From the rocked berm, a 4 ft. wide x 2 1/2 deep ditch will be constructed along <br /> the old road toward the 1st drop structure, for a distance of (50) fifty feet. <br /> Item 6. The area below the road crossing shall be graded prior to riprap installation. <br /> Item 8. The East Pit property gate will be replaced (6-rail, 14 ft. long). <br /> All riprap will be 1 foot thick, except at the East Pit road crossing #7, where it will be 2 feet <br /> thick. <br /> Large riprap located immediately west of the East Pit crossing is being reserved for future work <br /> and may not be used for this project. <br /> m:\imp\yjb\gec.amd <br /> U <br />