Laserfiche WebLink
PAGE 1 OF .3 MSDS. 5500 <br />MATERIAL SAFETY DATA.SHEET <br />GREAT DIVIDE LIMITED PRODUCT: GREATFLOC 5580 <br />PO BOX 901415 <br />SANDY, UT 84090-1415 <br />Emergency Telephone Number <br />801-943-6609 <br />TRADE NAME: GREATFLOC 5500 <br />DESCRIPTION: An acrylamide polymer <br />NFPA 704WHMIS RATING: 1/1 HEALTH III FLAMMABILITY 0/0 REACTIVITY 0 OTHER <br />0=1nsignificant 1= Slight 2= Moderate 3= High 4= Extreme <br />SECTION 2 HAZARDOUS 1NGREDIEM <br />Our hazard evaluation of the ingredient(s) under OSHN'S Hazard Communication Rule, 29 CFR <br />1910.1200 has found the following ingredient(s) hazardous. <br />INGREDIENT CAS # APPROX. %. <br />NONE <br />SECTION 3 PRECAUTIONARY ABEL INFORMATION <br />CAUTION: Avoid contact with skin, eyes and clothing. Do not take internally. <br />Empty containers may contain residual product: <br />SECTION d_FIRST AID INFORMATION <br />EYES: Flush with water for 15 minutes- Calla physician. <br />SKIN: Wash thoroughly with soap and water. Rinse thoroughly. <br />INGESTION: Do not induce vomiting. Give Water. Call a physician. <br />NOTE TO PHYSICIAN: No specific antidote is known. <br />CAUTION: If unconscious, having trouble breathing or in convulsions, do not.induce vomiting or give <br />water. <br />SECTION 5 HEALTH EFFECTS INFORMATEON <br />PRIMARY ROUTE(S) OF EXPOSURE: Eye, Skirt <br />EYE CONTACT: Gan cause slight irritation. <br />SKIN CONTACT: Can cause slight irritation. <br />SYMPTOMS OF EXPOSURE: A review of available data does not identify any symptoms from exposure. <br />AGGRAVATION OF EXISTING CONDITIONS: A review of available data does not identify any <br />worsening of existing conditions. <br />None available <br />SECTION 7 PHYSICAL AND CHEM CAL PROPERTIES <br />COLOR: White FORM: Dry granuleJpowder ODOR: None <br />DENSITY. 40-50 ibs/cu. R <br />SOLUBILITY IN WATER: 100% <br />SPECIFIC GRAVITY: NA ASTM D-3298 <br />pH (NEAT) = NA ASTM E-70 <br />FREEZE POINT: NA ASTM D-1177 <br />FLASH POINT: >200 ° F (PMCC) ASTM D-93 <br />VAPOR PRESSURE: >1.0 mm Hg @ 20 o C ASTM D-323 <br />NOTE: These physical properties are typical values for this product. <br />r? <br />50