1987-12-01_PERMIT FILE - C1981017 ‎(297)‎

• Permit No: C1981017
• IBM Index Class Name: PERMIT FILE
• Doc Date: 12/1/1987
• Doc Name: Thermal Dryer Emission Permit
• Section_Exhibit Name: Chapter IV Appendix IV-A-2
• Media Type: D
• Archive: No

PART I
• Page 2 of 20
Permit No. : CO-0000396
A. TERMS AND CONDITIONS (Continued)
1. Effluent Limitations
Beginning immediately and lasting through December 31, 1988 the
permittee is authorized to discharge within the limitations specified
below.
(1) Outfalls 002, 003, 004, 005 and 019
Effluent Parameter Discharge Limitations
Maximum Concentration
30-day avg. a/ Daily Max. c/
Flow - (MGD) N/A N/A
Total Suspended Solids (mg/1) 35 70
Total Iron (mg/1) 1.0 2.0
Salinity N/A N/A
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
Oil and grease shall not exceed 10 mg/l c/ in any grab sample nor
shall there be a visible sheen.
(2) Outfalls 001, 006, 008, 010, 013, 014, 015, 016, 017, 018, 020,
021, U22, 023, 024 and 025
a. Effective during periods of no precipitation
Effluent Parameter Discharge Limitations
Maximum Concentration
30-day avg. a/ Daily Max. c/
Flow - (MGD) N/A N/A
Total Suspended Solids (mg/1) 35 70
Total Iron (mg/1) 3.5 .7.0
Salinity N/A N/A
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
Oil and grease shall not exceed 10 mg/l c/ in any grab sample nor
shall there be a visible sheen.
See Part I.A.5. for Footnotes
Amended 9/6/83 dk
Amended 9 17 84 saw
Amended
I�