1987-12-01_PERMIT FILE - C1981017 ‎(297)‎

• Permit No: C1981017
• IBM Index Class Name: PERMIT FILE
• Doc Date: 12/1/1987
• Doc Name: Thermal Dryer Emission Permit
• Section_Exhibit Name: Chapter IV Appendix IV-A-2
• Media Type: D
• Archive: No

• PART I
Page 4 of 20
Permit No.: CO-0000396
A. TERMS AND CONDITIONS (Continued)
(3) Outfall 009
a) Effective during periods of no precipitation
Effluent Parameter Discharge Limitations
Maximum Concentration
30-day avg. a/ 7-day avg. b/ Daily Max. c/
Flow (MGD) N/A N/A N/A
BOD5 (mg/1) 30 45 60
Total Suspended Solids (mg/1) 35 N/A 70
Total Iron (mg/1) 3.5 N/A 7.0
Fecal Coliform (No/100ml) k/ 6,000 12,000 N/A
Salinity N/A N/A N/A
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
Oil and grease shall not exceed 10 mg/1 c/ in any grab sample nor
shall there be a visible sheen.
• b) Effective during periods of precipitation less than or equal to
the 10-year, -24-hour event for this facility.
Any discharge or increase in volume of a discharge caused by
precipitation within any 24-hour period less than or equal to the
10 year, 24-hour precipitation event (or snowmelt of equivalent
volume) may comply with the following limitations instead of the
limitations of item a) immediately preceeding or item c)
immediately following.
Effluent Parameter Discharge Limitations
Maximum Concentration
30-day avg. a/ 7-day avg. b/ Daily Max. c/
Flow (MGD) N/A N/A N/A
BOD5 (mg/1) 30 45 60
Fecal Coliform (No/100m1) k/ 6,000 12,000 N/A
Settleable Solids (ml/1) N/A N/A 0.5
Salinity N/A N/A N/A
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
Oil and grease shall not exceed 10 mg/l c/ in any grab sample nor
shall there be a visible sheen.
See Part I.A.5. for Footnotes
Amended 9/17/84
Amended 4 26/85
Amended
11