Laserfiche WebLink
Right Cylinder Diameter * 1.83 =Maximum Diameter <br />Wells operating less that 60% in Tops Mode and less than 60% in Bottoms <br />Mode results in higher than average diameters in both the upper and <br />lower ore zones. <br />Right Cylinder Diameter * 1.415 =Maximum Diameter <br />Appendix E contains the percentage of time for each operating mode for <br />each well, the tabulation of the maximum cavity diameter for each well, <br />and a drawing of the right cylinder diameter and the estimated maximum <br />cavity diameter for each well within the wellfield. <br />It is important to note that these estimated representations of maximum <br />cavity diameter are based upon a single cavity characterization. ASLLP is <br />uncertain of the variability of the ratio of maximum cavity diameter to the <br />calculated right cylinder diameter. This data is presented to communicate <br />the potential size relationship of the ASLLP well cavities as requested by <br />the CDMG and the BLM. <br />