2008-03-03_PERMIT FILE - X200822309

Home Browse Search

Vehicular travel on other than established graded and surfaced roads shall be limited by Oxbow Mining LLC to that absolutely necessary to conduct the exploration. Travel will be confined to graded and surfaced roads during periods when excessive damage to vegetation or rutting of the land surface could result. The proposed activities will not require upland diversions, or diversions of ephemeral, intermittent or perennial streams. Drill Site Construction -The Fourteen (14) boreholes proposed in this 2008 exploration program can be summarized by the following information: c;tP ~ Cnrface Rtarus Road Hole Depth Pad size 1 ECM-XX-47 Oxbow Fee Existing 1,200 0.25 acre 2 ECM-XX-48 Oxbow Fee Existing 1,500 0.25 acre 3 ECM-XX-49 BLM License 4,922' 2,450 0.25 acre 4 ECM-XX-50 BLM License See 51 2,230 0.25 acre 5 ECM-XX-51 BLM License 3,488' 2,240 0.25 acre 6 ECM-XX-52 BLM License Existing 1,650 0.25 acre 7 ECM-XX-53 BLM License See 49 2,150 0.25 acre 8 ECM-XX-54 BLM License See 49 2,215 0.25 acre 9 ECM-XX-55 BLM License Existing 2,450 0.25 acre 10 ECM-XX-56 Oxbow Fee Existing 1,450 0.25 acre 11 ECM-XX-57 BLM License Existing 2,030 0.25 acre 12 ECM-XX-58 BLM License Existin 2,350 0.25 acre 13 ECM-XX-59 BLM License 972' 2,330 0.25 acre 14 ECM-XX-60 BLM License Existing 2,400 0.25 acre Total 9,382' L2S,64J' s.~ acres Most drilling can be conducted with minimal site preparation, since the drill rig can be set-up and leveled using self-contained hydraulic jacks. Where site preparation is necessary due to the need to utilize drilling fluids, a pad having maximum dimensions of approximately 80 feet in width and 130 feet in length will be established. Pad preparation will involve the use of a tracked dozer or backhoe to establish a level drill site. If topsoil exists, up to 12" will be salvaged and stored in a stockpile(s) located along the side of the pad and marked with a "topsoil" sign. Soil stripping will not occur in areas that have been previously disturbed and little or no soil material remains, typically in areas of 30% or greater slopes. The pad sites will be restored to approximate original contour. Shrubs, trees and other organic matter removed during pad preparation may be incorporated onto the regraded surface prior to seeding to enhance reclamation of this disturbed site. Each mud pit will typically be sized approximately 20 feet in length, 4 feet in width and 8 feet deep (23.7 cubic yards each). The pits will generally be located in the "cut" portion of the pad for pad stability. The maximum disturbance area for each drill site is expected to be approximately 0.25 acres. No surface blasting is anticipated. Drilling and Related Activities - 61/4" drill holes will be drilled using rotary or auger drilling methods to the depth of the desired coring interval. In order to avoid potential sample • Page 4