Laserfiche WebLink
Page 4 Colorado Department of Public Health and Environment <br />Construction Permit Air Pollution Control Division <br />SCHMIDT CONSTRUCTION <br />Permit No. 96-EL-561-F <br />Final Approval <br />Notes to Permit Holder: <br />1) The production / throughput or raw material processing limits and emission <br />limits contained in this permit are based on the production/processing rates <br />requested in the permit application. These limits may be revised upon request <br />of the permittee providing there is no exceedance of any specific emission <br />control regulation or any ambient air quality standard. A revised air <br />pollution emission notice (APEN) and application form must be submitted with a <br />request for a permit revision. <br />2) The emission levels contained in this permit are based on the following <br />emission factors: <br /> Emission <br /> Pollutant Factor Process Remarks <br /> ,pound per Unit <br /> process <br /> unit <br />Particulate Matter (PM)- Fug. 1.0520 TON 70 ~ control <br /> <br /> extracted <br />PM-10 (PM < 10 µm)- Fugitive 0.4590 70 ~ control <br />Particulate Matter (PM) 0.0005 TON AP-42 transfer <br /> material point formula. <br /> transferred Moisture <br />PM < 1o µm (PM-io) 0.0003 at each content: 5.5 ~ <br /> transfer <br /> point <br />3) This source is classified as a: <br />Minor Source <br />4) The following emissions of non-criteria reportable air pollutants are estimated <br />based upon the material consumptions / throughput limits. This information is <br />listed to inform the operator of the Division's analysis of the specific <br />compounds. This information is listed on the Division's emission inventory <br />system. <br />C.A.S. # SUBSTANCE ~ EMISSIONS fLB/YR1 <br />NONE 0.0 <br />039/0828/001 <br />