Laserfiche WebLink
• north. The dikes are lithologically identical co the Rollins sandstone, <br />crhich is the source of the material. Hopefully they will not be a <br />• <br />hinderance to Longwell type mining techniques. <br />The Cameo ranges from 5.66 to 9.51 feet in thickness, averaging <br />7,61 feet. It is thickest in the north part of the lease, and appears <br />to thin to the southeast. These thicknesses include bony coal and <br />siltstone partings where present. The following table shows individual <br />thicknesses and depths determined by drilling: <br />]]ole No. Thickness, ft. Depth, ft. <br />CC-76-1 9.39 376.57 <br />CC-76-2 9.24 579.00 <br />CC-76-3 7.37 416.35 <br />CC-76-4 6.50 (e-log} 797.40 <br />CC-76-5 9.51 107.55 <br />CC-76-6 8.53 168.42 <br />CC-76-7 7.00 641.61 <br />CC-77-1 5.97 868.28 <br />CC-77-2 5.66 1,302.10 <br />Average Thickness 7.61 <br />Quality of the Cameo average as follows: <br />Moisture, as received 7.68% <br />Btu, as received 10,224 <br />Ash, dry 19.71"/. <br />Volatile Matter, dry 35.85% <br />Fixed Carbon, dry 44.43% <br />Btu, dry 11,082 <br />Sulfur, dry 0.92% <br />FSZ 1 <br />C (dry 63.17% <br />H (dry) 4.51% <br />N (dry) 1.35Y. <br />C1 (dry) 0.01% <br />0 (dry) 10.32% <br />"Reserve Base" estimates were calculated in accordance with General <br />Plining Order No. 1. The "Coal Reserve Base "'.ap" shows the location of <br />• drill Boles wt,ich were used Co calculate tonnnses. A work map has been <br />included which sf,ows how ti,e lease was divided into sections so acreages <br />could l,e obtained. Tlie "Coil Recovery Chart - Reserve Base" shows eacl, <br />