Laserfiche WebLink
XR-5® <br />Seaman Corporation <br />High Performance XR-5®8130 Reinforced Geomembrane <br />Hydrostatic Resistance ASTM D751 800 psi minimum <br />Method A <br />5.51 MPa minimum <br />Blocking Resistance ASTM D751 #2 Rating maximum <br />180° F/82° C <br />Adhesion -Ply ASTM D413 15 Ibf /in minimum 13 daN/5 cm minimum <br />or Film Tearing Bond or Film Tearing Bond <br />Bonded Seam Strength ASTM D751 <br /> Seam Strength 550 Ibf in minimum 2447 N minimum <br /> as modified by NSF 54 <br />Abrasion Resistance ASTM D3389 <br /> H-18 Wheel 2000 cycles (min.) before fabric exposure <br /> 1000 g Load 50 mg/100 cycles maximum weight loss <br />Weathering ~ ASTM G23 8000 hrs (min.)-No appreciable changes <br />Resistance (Carbon-Arc) or stiffening or cracking of coating <br />Water Absorption ASTM D471 0.025 kg/m2 maximum @ 70° F/21 ° C <br /> Section 12 0.14 kg/m2 maximum @ 212° F/100° C <br /> 7 Days <br />Wicking Shelter-Rite® <br /> Procedure 1/8 in maximum 0.3 maximum <br />Puncture Resistance ASTM D4833 250 Ibf in minimum 1112 N minimum <br />Coefficient Of Thermal ASTM D696 8 x 106 in/in/°F 1.4 x 10~5cm/cm/°C <br />Expansion/Contraction maximum maximum <br />Seaming: Thermal welding methods are recommended. No glues or solvents are suggested <br />We believe,this information is the best currently available on the subject. We offer is as a suggestion in any appropriate <br />experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We <br />make no guarantee of the results and assume no obligation or liability whatsoever in connection with this information. Incase of <br />conflict between standard and metric specifications, standard shall apply. <br />