Laserfiche WebLink
• 1 <br />TABLE B-1. WATER-QUALITY DATAOcontinueci). <br />BELL DATE 5e Se* V V* Ag Ag * In Zn * 0 P0~ HARD iS5 <br />6883 800229 -- -0.005 -- -- -- 0.0~ - -- -- -- - -- <br />800724 -- -0.01 -- -- -- -0.Ol - -0.01 -- -- 727 114 <br />811217 -0.001 -- - -- -- -- -- -- -- -- -- -- <br />821221 -D.ODI - -0.01 -- -- -- -- -- -- 0.03 -- - <br />830830 -0.002 -0.002 0.006 -- -- -- - - - -0.02 -- -- <br />8~0823 -0.002 -0.002 -0.002 -- -- -- -- -- -- 0.08 -- -- <br />850919 -0.002 -0.002 0.01 -- -- -- - -- -- - -- -- <br />85112Z -0.002 -0.002 -0.01 -- -- -- -- -- -- - -- <br />11 831006 -0.002 -0.002 0.002 - -- - - -- -- -0.02 - -- <br />840816 -0.002 -0.002 0.006 -- -- -- -- -- -- -0.02 -- - <br />850604 0.01 0.02 -0.01 -0.01 -- -- - -- -- -- -- -- <br />COY 840823 -0.002 -0.002 0.03 - -- -- -- - -- 0.03 - - <br />850925 -0.002 -0.002 -0.01 -- -- -- - - - - -- <br />851023 -0.002 -0.002 0.01 <br />NOTES: <br />"-" sign before a value indicates that the value is bass than <br />the detection limit. Value shown is lower detection limit. <br />An "f" subscript on a parameter indicates values were field measured. <br />HARD = Hardness, in mg/1 of CaCO3. <br />DSSUM = Calculated sum of dissolved solids, in mg/1, <br />BALNC = (Cations - Anions) / (Cations + Anions) x 300. <br />All values are in MG/L except as otherwise noted and the following: <br />TEMP = water temperature, in DEG C. <br />COND = conductivity, in micromhos/cm a`) 25 DE6 C. <br />pH = pH, in standard units. <br />"*" symbol indicates the parameter is a measurement of total concentration. <br />• <br />B-83 <br />