My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
REP50650
DRMS
>
Back File Migration
>
Report
>
REP50650
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/25/2016 12:55:34 AM
Creation date
11/27/2007 12:54:43 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981018
IBM Index Class Name
Report
Doc Date
3/15/1999
Doc Name
1998 AHR
Annual Report Year
1998
Permit Index Doc Type
HYDROLOGY REPORT
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
72
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br />' 2.3 Red Wash Alluvial Monitoring Program <br />' Portions of Red Wash have experienced subsidence due to longwall mining at the Deserado <br />Mine. As required by CMLRD (now DMG), BME initiated a detailed hydrology monitoring <br />' program in Red Wash above the first longwall panel to be mined. The monitoring program <br />consisted of nine (9) holes drilled in the Red Wash alluvium across the predicted zone of <br />subsidence from longwall panel 1 (LW-1). Water levels in the holes were monitored before, <br />' during and after active subsidence took place. The purpose of the monitoring program was to <br />determine if surface flow in Red Wash was being lost to bedrock as the result of subsidence. <br />' The monitoring data, analysis and conclusions reached were submitted to CMLRD in an Interim <br />Report, November 1987, and in the Third Annual Hydrology Report, January 1988. The <br />' purpose of the monitoring program was met in that it was determined that surface flow in Red <br />Wash was not lost to bedrock as a result of subsidence. The major conclusions of the study <br />' were: <br />• Recharge of the basal alluvium was from the upper sandstone facies (bedrock) and <br />' not from infiltration of surface runoff. <br />• Subsidence cracks in Red Wash as the result of longwall mining were quickly filled <br />with clay and silt preventing loss of surface water flow to bedrock. <br />' Longwall mining of panel 2 (LW-2) passed under Red Wash in September 1988. The surface <br />elevation subsided approximately 3.7 and 4.1 feet at RW-7 and RW-9 respectively. Events in <br />' Red Wash over LW-2 were expected to occur in the same fashion as those seen over LW-1. <br />The subsidence trough was developed and any subsequent flow in Red Wash was expected to <br />form a pond. The pond would trap sediments carried in the flow(s) until full, at which time flow <br />' in Red Wash would likely resume flowing in a relatively narrow active channel. <br />' The conclusions noted above were further confirmed during 1989. On July 29, 1989 a large <br />flow event occurred in Red Wash. The subsidence trough over LW-2 filled with water. The <br />trough over LW-1 also filled, but to a lesser depth as it had filled with sediment in the past. <br />Water level measurements were taken in the monitoring holes while they were surrounded by <br />standing water. Readings had been taken only 18 days before. Even though the holes were <br />' surrounded by standing water (approximately 3 and 4 feet deep at RW-7 and RW-9 <br />respectively) the alluvial water depths had still decreased. <br />' Although the purpose of the monitoring program was met, BME continued to monitor the Red <br />Wash alluvial holes until water year 1996-1997. The latest monitoring results are reported in <br />16 <br />1 <br />
The URL can be used to link to this page
Your browser does not support the video tag.