REP49590 - Laserfiche WebLink

Home Browse Search

certificate is included in Figure 1 based on quality control test frequencies specified in Appendix `'A", Page 16). 2.2 Delivery 2.2.1 Transportation and Handling Transportation of the geomembranz and/or bentonite blanket will be performed by the manufacturer through an independent trucking firm, or other party as agreed upon by the owner. If the geomembrane or bentonite blanket arrives on site prior to ILPI project personnel, the customer is responsible for off loading rolls. Geomembrane, when off- loaded, should be placed on a smooth surface free of rocks or any other protrusions which may damage the material. No special covering is necessary for geomembrane. Bentonite blankets, when off-loaded, should be placed on a raised surface and covered so that moisture can not come in contact with the bentonite blanket. The following should be verified prior tooff-loading either geomembrane or bentonite blanket: Handling equipment used on the site adequate and does not pose any risk of damage to either the geomembrane or bentonite blanket; and Personnel will handle the geomembrane and bentonite blanket with care. Any welding rod delivered to the site prior to ILPI arrival should be kept covered and dry or placed in a storage facility. Upon arrival at the site, ILPI shall conduct a surface observation of all rolls for defects and for damage. This inspection shall be conducted without unrolling rolls unless defects or damages aze found or suspected. ILPI shall indicate any damage to the Project Manager. 2.2.2 Storage The Project Manager shall provide storage space in a location (or several locations) such that on-site transportation and handling aze minimized. Storage space should be protected from theft, vandalism, passage of vehicles, and be adjacent to the azea to be lined. Bentonite blanket storage should be elevated and dry. GEOMEMBRANE AND BENTONITE BLANI:ET INSTALLATION 3.1 Crest Anchorage System 12