Laserfiche WebLink
1 <br />' <br /> Asa minimum, we anticipate multiple level piezometers at <br /> 6 to 7 locations as follows: <br /> 1.) Starting on the first slope bench (elev. 4880) in <br /> the area of existing well P-1, a drill hole should <br /> be advanced to the bedrock or well into the <br />' alluvium with multiple piezometers installed based <br /> on the information obtained from the drill logs. <br /> The second piezometer drill hole should be <br />' positioned just above PZ P-1 on the second slope <br /> bench (elev. 4910) and again advanced to or near <br /> bedrock with the multiple piezometer tips <br />' positioned according to dill log information and <br /> the results of measurements obtained from the first <br /> multi-tipped piezometer installation. <br />' <br /> 2.) The first of the second series of piezometers <br /> should be installed on the first slope bench in the <br /> vicinity of existing PZ B1-1 or between B1-1 and <br />' P1-a, advanced to or near bedrock with multiple <br /> tipped piezometers installed according to the drill <br /> log information. The second croup of piezometers <br />' in this series should be installed on the second <br /> slope bench just above the location of the first <br /> (new) piezometer near PZ B2-4 or between B2-4 and <br /> B2-1. This hole should also be advanced to or near <br />t bedrock with the multiple PZ tips set according to <br /> drill log information and findings from previous <br />' installations. <br /> 3.) The first of the third series of piezometers should <br /> be installed on the first slope bench near existing <br />' PZ P-2 or between P-2 and P-3. Again, advanced to <br /> or near the bedrock with the tips set according to <br /> the loos and previously gathered information. The <br /> second hole for this series should be positioned on <br />' the second bench directly above the first (new) <br /> piezometer. Installation should be similar to that <br />' noted above. <br /> 4.) The last piezometer should be installed after <br /> initial measurements from the other multi-tipped <br />' piezometers have been evaluated. Sts installation <br /> would be to verify/refine the data or to help <br /> define the extent of a certain problematic zone <br /> should such a zone become evident. If the <br />' conditions are well defined by the first 6 <br /> piezometers, the 7th installation will not be <br /> needed. <br /> <br />' 19 <br /> <br />