Laserfiche WebLink
• 11. The minimum pressure maintained in the cavity will conform to the <br />guidance of the Agapito cavity stability study. <br />This document is intended to describe the characterization for agency <br />approval. Since actual characterization will not occur until Fall, 2003, ASLLP <br />has time to refine or revise the procedures to insure that the procedures meet <br />all agency expectations. <br />Questions, comments, or suggestions are welcomed. <br /> <br />List of Figures <br />Figure 1 -Cross Section of Well 29-24 <br />Figure 2 -Well 29-24 Location Map <br />Figure 3 -Location of 8" Pipeline Tap <br />Figure 4 -Location of 4" Surface Gas Pipeline <br />Figure 5 -General Arrangement of Gas Compressor on 29-24 Well Pad <br />Figure 6 -Schematic of Gas Compressor Equipment and Instrumentation <br />Figure 7 - Diagram of well 29-24 Wellhead Modification. <br />Supplemental Plans <br />Ground Water Monitoring Plan <br />Emergency Response Plan <br />Wellfield Spill Mitigation Plan <br />Subsidence Monitoring Plan <br />Mechanical Stability of Solution Cavities <br />