PERMFILE138305

• Permit No: C1981071
• IBM Index Class Name: Permit File
• Doc Date: 12/11/2001
• Section_Exhibit Name: RN EXHIBIT 1 TO EXHIBIT 8
• Media Type: D
• Archive: No

J
PART I
Page la of 19
Permit No .: CO-0027154
A. TERMS AND CONDITIONS
1. Effluent Limitations for Outfalls 002, 003, 004, 006, and 008
Beginning immediately and lasting through June 30, 1991 the permittee is
authorized to discharge within the limitations specified below, from
outfall(s) serial number(s) 002, 003, 004, 006, and 008.
u
Effluent Parameter
Flow - (MGD)
Total Suspended Solids (mg/1)
Total Iron (mg/1)
Electrical Conductivity, micromhos/cm
Discharge Limitations
Maximum Concentration
30-day avg. a/
N/A
35
3.5
N/A
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
N/A
70
7.0
N/A
011 and grease shall not exceed 10 mg/1 c/ in any grab sample nor shall there
be a visible sheen.
Any discharge or increase in volume of a discharge caused by
precipitation within any 24-hour period less than or equal to the
10-year, 24-hour precipitation event (or snowmelt of equivalent volume)
may comply with the following limitations subject to burden of proof
requirements described in Part I.A.7.
Daily Maximum c/
Effluent Parameter
Discharge Limitations
Maximum Concentration
N/A
0.5
N/A
Flow - (MGD)
Settleable Solids (ml/1)
Electrical Conductivity, micromhos/cm
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
011 and grease shall not exceed 10 mg/1 c/ in any grab sample nor shall thivrN
be a visible sheen.
• See part I.C. for Footr.~,r-.•s
Daily Maa. c/
Amended 03/19/87
Amended 1 21
Code: i - 7 Date: ''~ Amended B/28/90 Effective •~)