My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE137694
DRMS
>
Back File Migration
>
Permit File
>
400000
>
PERMFILE137694
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:38:19 PM
Creation date
11/26/2007 6:24:28 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1980007
IBM Index Class Name
Permit File
Doc Date
7/15/2002
Doc Name
Environmental Assessment, Panels 16-24
Section_Exhibit Name
Exhibit 80 Drilling Activities - TR96
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
133
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
CoalMetbane Draimage Projee!- Panek 7G74 Wu! E!k Mine • Page 1-8 <br />1.3.6 Operate the MDWs to Drain Methane from the Underground Mine Workings <br />Following completion of each MDW, a methane exhauster would be installed to draw the methane to <br />the surface where it would be used to power the exhauster blower unit, with any excess vented to the <br />atmosphere. Bottled propane would be used as a back-up fuel source for exhausters if methane <br />concentrations are too low to power the exhauster units. The MDWs would be used in combination <br />with the existing mine ventilation system and horizontal methane drains within the underground mine <br />workings to effectively reduce and control methane levels in active underground mining azeas. <br />Exhauster units axe self-contained skid- and tire-mounted units. These units would be MSHA <br />approved for safety, would be inspected on a regular basis, and would be enclosed within a security <br />fence. Methane exhausters would remain in-place and continue to operate so long as they continue to <br />be effective in draining methane from the underground mine workings. Based on recent MDW <br />experience, it is anticipated that each MDW would remain active and continue to be effective during <br />the period when the coal extraction face approaches it, passes underneath it, and for a period of time <br />after it passes beyond it. Experience with existing MDWs indicates that some wells continue to vent <br />methane for several months after the extraction face has passed by. It is currently anticipated that the <br />effective life of MDWs would range from six months to two yeazs. MDWs in one panel may prove <br />effective in venting methane from adjacent mining panels. <br />MCC would monitor and inspect active MDW installations daily following initial installation to assure <br />that they are functioning properly. Monitoring would focus on evaluating the sate of methane <br />production and the constituents of the exhaust gas and would involve collection of gas samples. <br />Inspection would involve checking the NIDW installations and methane exhausters to assure that they <br />are functioning properly and to identify any problems or concerns. It is anticipated that the <br />frequency of monitoring would decrease to weekly monitoring, as required by MSHA. Inspections, <br />to assure proper operation, would be more frequent and could vary seasonally. MCC is testing <br />remote sensing equipment that could reduce required monitoring and inspection frequenry, if proven <br />consistently reliable. Access by ATV and/or pick-up, and snowcat or snowmobile in the winter, for <br />at least weekly monitoring would be needed for the life of the MDWs, estimated at this time to be six <br />months to two years. It is anticipated that all active MDWs would be inspected and monitored in one <br />weekly trip. <br />1.3.7 Plug and Seal MDWs and Exploration Drillholes and Reclaim Associated <br />Disturbance <br />Once the MDWs on each pad are no longer needed, the methane exhauster units would be removed, <br />the MDWs would be plugged and sealed, and remaining pad areas and associated new access road <br />disturbance would be reclaimed. MDWs and exploration drillholes would be plugged, sealed, and <br />abandoned consistent with applicable CDMG permit and BLM lease requirements. Sealing and <br />plugging would involve placement of cement from the hole bottom or from a plug set near the end of <br />the casing to 50 feet above the uppermost thick coal seam and from 50 feet below to SO feet above <br />any aquifers encountered iti the hole. The remainder of the hole would be filled with an approved <br />completion mud, gel, cuttings, or cement to within 5 feet of the surface. A 5-foot cement sttrface <br />plug would be set, and an appropriately labeled monument marker would be cemented into the <br />surface plug. Surface casing would be cut off at the level of the soil surface and would be covered <br />during regrading. <br />Drill pads and MDW operating pads would be reclaimed by draining, backfilling, and compacting the <br />fill in the mud pits; cleaning up and removing any trash, debris, and dulling materials and supplies; <br />returning the disturbed areas to their approximate original contour; replacing salvaged soil materials; <br />and revegetating the disturbed areas. As indicated by Tables T1A and T1B there would be three <br />options for decommissioning of new road disturbance; the road would be obliterated by pulling any <br />cut material back onto the road and returning disturbed azeas to their approximate original contour; <br />~~/Nw~+. G+'G/E.UO.yn il.~n+~:~t,,sFr <br />~/1/os.r. <br />Environmental Arrerrment <br /> <br /> <br />t <br />1 <br /> <br /> <br />1 <br /> <br /> <br />1 <br /> <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.