Laserfiche WebLink
together, although they would probably not be reclaimed at the same time, as previously noted. <br />Reclamation will involve excavation, removal, and salvage or dispose of all of the Elk Creek Culvert <br />except for those portions approved for retention in conjunction with permanent posttnining road <br />crossings. The lower portion of the Elk Creek channel will then be reestablished through the mine <br />disturbance area consistent with approved postmining drainage designs, and remaining disturbance <br />azeas will be regraded to a stable configuration which ties into the existing topography and adjacent <br />reclaimed azeas. Reclamation of these areas will require approximately 123,000 ty of cut and 185,500 <br />ry of fill. The remaining 62,500 ry of excess cut from the Elk Creek Mine Surface Facilities azea will <br />be used to meet the cut/fill material balance. <br />The only existing or proposed satellite facility requiring reclamation (other than miscellaneous water <br />and sewage effluent facilities, exploration sites and coalbed methane well sites and roads) is the <br />Substation No. 3 and C-Gulch Ventilation Shaft azea and the Hubbazd Creek Fansite area. <br />Reclamation of the substation No. 3 and C-Gulch ventilation azea will involve recovery and <br />disuibution of approximately 5,000 cY of material from the existing overburden stockpile and <br />regrading of the replaced material to tie into the existing topography. Reclamation of the Hubbard <br />Creek Fansite area will require recovery and distribution of approximately 6700 yazds of material from <br />the existing overburden stockpile and regrading of the replaced material to tie into the surrounding <br />topography. The miscellaneous satellite facilities noted above would generally require minimal <br />grading, which can be accomplished in conjunction with soil material replacement, and will involve a <br />direct on-site cut/fill balance. <br /> <br /> <br />TR-49 Revised January 2005 <br />The final postmining configurations for all mine disturbance azeas aze shown on the Facilities <br />Postmining Topography Maps (Map 2.05-M6, Sheets 1 thru 6). Cuts and fills for final reclamation <br />backfilling and grading are shown on the Reclamation Cut/Fill Isopach Maps (Map 2.05-ES-Ml) and <br />post mine cross-section Map 2.05-RS-M2. Table 2.05-ES-T2, Reclamation Cut/Fill Summary, <br />provides a tab'ulaz summary of the volumes is shown on the Reclamation Cut/Fill Isopach Maps. <br />