Laserfiche WebLink
• Rule 2.10.3 - Specific Information Requirements <br />(1) In addition to any other maps specifically required by Rule 2, <br />the permit application shall include maps showing: <br />(a) All boundaries of lands and names of present owners of <br />record of those lands, both surface and subsurface, included in or <br />contiguous to the permit area; <br />(b) The boundaries of land within the proposed permit area upon <br />which the applicant has the legal right to enter and begin surface or <br />underground mining activities; <br />RESPONSE: <br />The boundaries and names of surface and subsurface owners of record of <br />the lands within and adjacent to the proposed permit area are shown on <br />Map 1, Surface and Coal Ownership. <br />• (c) The boundaries of all areas proposed to be affected over the <br />estimated total life of the proposed surface or underground mining <br />activities, with a description of size, sequence, and timing of the mining <br />and subareas for which it is anticipated additional permits will be sought; <br />RESPONSE: <br />No new areas are proposed to be affected over the estimated total life <br />of the operation. Therefore, the requirements of this sub-section are <br />not applicable. <br />(d) The location of all buildings on and within 1,000 feet of <br />the proposed permit area, with identification of the current use of the <br />buildings; <br />(e) The location of surface and subsurface man-made features <br />within, passing through, or passing over the proposed permit area, <br />• <br />2.10-3 <br />