Laserfiche WebLink
PART I <br />Page 9 of 19 <br />F. GENERAL REQUIREMENTS (Cont'd.) <br />4. Flow Measuring Device <br />If not already a part of the permitted facility, within ninety (90) <br />days after the effective date of the permit, a flow measuring device <br />shall be installed to give representative values of effluent quantities <br />at the respective discharge points. Unless specifically exempted or <br />modified in Part I.B.2 of this permit, a flow measuring device will be <br />applicable at all designated discharge points. <br />At the request of the Director of the Hater Quality Control Division, <br />or the Regional Administrator of the Environmental Protection Agency, <br />or their authorized representative, the permittee shall show proof of <br />the accuracy of any flow-measuring device used in obtaining data <br />submitted in the monitoring report. The floe-measuring device must <br />indicate values within ten (10) percent of the actual floe being <br />discharged from the facility. <br />• <br />• .Code: i - 23 Date: 1 - 84 <br />7-6-17 <br />