PERMFILE129259 - Laserfiche WebLink

Home Browse Search

• 04/•06/2007 02:49 9705224018 LUGAN CU GUMMISSIUNU ~r-iuc r~y~ nn KINDER~MaRCAN Guidelines #or i)eslgn and Construction near Kinder Morgan Operated Facilities • Tho metallic foreign Ilse shall be coated with a suitable pipe coating for a distance of at least 10 feet on either side of the crossing unless atHerwise requested by the KM CP Technician. • AC Electrical lines must be installed in conduit and propedy insulated. • DO"i' approved plpeUne markers shall he installed so as to Indicate the route of the foreign pipeline across the KM ROW. • No power poles, Ilght standards, etc. shall be installed on KM easement. Construction • CanU2ctors shall be advisee bf KM's requirements and be contractually obligated to comply. • The continued Integrity of KM's pipelines end the safety of all individuals in the area of proposed work near KM'S facilities are of the utmost Importance. Therefore, contractor must meet with KM representatves prior id conswction to provide and receive notlfication II'sfiriJS fdP appiifpRata areg Sphfaikins 8nd tlltrergericy pelsbirHLl. I~111's on-'slta~repr[htafive wlfl rvaqulre dlsconUnuatlon of any work that, In his opinion, endangers the operations or safety of personnel, pipelines or faclllllos. • The Contractor must expose ail KM transmission and dlshtbution Ilnos prior W crossing to determine the exact alignment and depth of the lines, A KM representatve must be present. In the evert of parallel lines, only one pipeline can be exposed at a time. • KM will not albw pipelines Go remain exposed avemight without consent of KM designated representative. Contractor may be required to backfill pipelines at the end of each day. • A KM representative stiall~, do all line beating. A KM representative shall be present for hydraulic excavatlon. The use of probing rods for plpellrie locating shall be pertormed by KM representatives onty, to prevent unnecessary damage to the pipeline seating. • Noffficatlorr shall be given, to KM at least 72 hours before start of construction. A schedule of activities for the duration of the protest must be made available at that time to fadlkate the scheduling of Kinder Morgan, Ins.'s work site representative. Any Contractot 3chetlule Changes shall be provided to Kinder Morgan, Inc. Immediately. • Heavy equipment will ndt be allowed to operate directly over KM pipelines or in KM ROW unless written approval Is obtained atom (Company). Heavy equipment shall only be allowed to cross KM pipelines at locatlons designated by Kihder Morgan, Inc. Contractor shall comply with all precautltlnary measures required by KM to protect its pipelines. When inclement weather exists, provisions must be made to compensate for sail dlsplacemeM due io subsidence of tlres. Equipment excavating within ten (10) feet of KM Plpelinos well have a plate guaro Installed over the teeth to protect the pipeline ' i • Excavatlng or greding. WNlch might resdk in erosion or which could render the KfdTtOW inaccessible shelf not lie perm(fted unless the contractor/developer/owner agrees to restore the area to its original condition and provide protectlon to KM's facility. • A KM representative shall be on-site to monitor any construction activities within twenty-five (25) feat of a KM pipeline or aboveground appurtenance. The contractor shall not work within this distance without a KM representatve being on site. Only hand excavatlon shall be permitted within one (1) foot of KM pipelines, valves and fittings. However, proceed with extreme caution when within three (3) feet of the pipe. • Ripping is only allowed when the position of the pipe is known and riot within ten (10) feet of KM facility unless comparry represontatlve IS present. , • Temporary support of any exposed KM pipeline by Contractor may be necessary ff required by KM's on-site representative. Backflll below the exposed Ilnes and 12" above the Iihes shall be replaced with sand or other selected material as approved by KM's on-site represantathre and thoroughly compacted in 12" Itfts to 95°/a of standard proctor dry density minimum or as approved by KM's on-site represeMatlve. This is to adequately protect against stresses that may be caused by the settling of the pipeline. • No blasting shall be allowed within 1000 feet of KM's facilities unless blasting not~dtion Is given to KM Including complete Blasting Plan Data. A pre-blast meeting shall be conducted by the organization responsible for blasting. a,.f<renro~ r~RM pmceduro 204 Page ~ of 3 OM?.00.29 nGMG