Laserfiche WebLink
<br />t 10. Method of flow measurement for each discharge (i.e. 90 wnotch weir, pump <br />capacity, parshall flume, etc.). Designate whether currently installed or <br />proposed. <br />1 <br />_ pumU capacity <br /> <br />t 11. Optional: You may attach additional sheets describing any additional water <br />pollution control programs (such as Mined Land Reclamation Stipulation a) <br />which may affect your discharge. <br />r 12. Do you have bulk storage of diesel fuel, gasoline solvents or other hazardous <br />materials on site? YES x NO If yea, then indicate location <br />' on general sketch map (8). <br />13. Analytical data for the following parameters unless exempted shall be <br />submitted from at least one sampling of each discharge point. See <br />instructions. If no water is currently available for analysis, so indicate. <br />_ Alkalinity (mg/1) pH (s.u.) <br />' _ Total Dissolved Solids Cmg/1) COD Cmg/1) <br />Total Suspended Solids (mg/1) <br />031 and Grease (mg/1) <br />t X No water to analyze at this time. <br /> The Division may request analysis of other parameters once the application <br />' ha.g been reviewed. <br /> 14. Is or will land application of any wastewater be practiced for purposes other <br />' the;n reclamation or dust control? YES X NO <br /> If YES, identify disposal area, specify acreage, quality and quantity of <br />' wager, method of application, seasonal operation, pretreatment. <br />1 <br /> <br />1 <br />1 <br />