PERMFILE111899 - Laserfiche WebLink

Home Browse Search

Exhibit A I71 Atlxhed to end made a pnn of Nat ttrtain Agreement m Mine Within 208 Feel of a Pemiancnl en-Made Swcmre made between Ferfmmwurkin LLP and Kart-McGee Gathering LLC, dated November Isl, 20114 General Guidelines for Design and Construction Activities On or Near Karr- McGee Gathering LLC and Kerr -McGee Rocky Mountain Corporation Pipelines and Related Facilities This list of design, wnstruction and contractor requirements, inGuding but not limited to the following, is for the design and installation of foreign utilities or improvements on Kerr McGee Gathering LLC (KMG) right-of-way (ROW). These are not intentletl to, nor do they waive or modify any rights KMG may have under existing easements or ROW agreements. For in(onnation regarding KMG's fights and requirements as they pertain to the existing easements, please reference existing easements and amendments documents. This list of requirements is applicable for KMG facilities on easements and in road rights of ways only. Encroachments on fee property should be referted to the Land 6 ROW Department. Any reference to KMG in the below requirements is meant 1o include antl apply to any Kert McGee entity. Design • KMG shall be provided sufficient prior notice of planned activities involving excavation, blasting, or any type of construction on KMG's ROW or near its facilities. This is to determine antl resolve any location, grade or encroachment problems and allow for the protection of KMG's facilities and the general public. This prior notification is to be made before the actual work is to lake place. • The encroaching entity shall provide KMG with a set of drawings for review and a set of final wnstmction drawings showing all aspects of the proposed faUlities in the vicinity of KMG's ROW. The encroaching entity shall also provide a set of'as-built drawings' and submit to KMG, showing the faulities in Ina vicinity of KMG's ROW upon completion of the work. • Only 1aUlilies shown on drawings reviewed by KMG will be approved for installation on KMG's ROW. All drawing revisions that afleU facilities proposed to be placetl on KMG's ROW must be approved by KMG in writing. • KMG shall approve the design of all permanent road crossings. • Any repair b sudace facilities following luture pipeline maintenance or repair work by KMG on it's prior rights' ROW will be at the expense of the developer or landowner. In addition, any repair to sudace facilities fallowing future pipeline maintenance or repair work by KMG on replacement ROW granted to relocate KMG facilities will also be done at the expense of the developer or landowner unless expressty atltlressed in surtace use agreements and approvetl in writing by KMG. • The depth of cover over the KMG pipelines shall not be increased or reducetl nor sudace modified for tlrainage without KMG's written approval. • Conslmclion of any permanent structure within KMG pipeline easement is not DenniHed without writen approval by KMG. • Planting of shrubs and trees is not permittetl on KMG pipeline easement without written approval by KMG. • Irrigation equipment i.e. back8ow prevent devices, meters, valves, valve boxes, etc. shall not be located on KMG easement without written approval by KMG. • Foreign utility installations, IE, distribution gas, oil antl gas gathering, water, electric, telephone, cahle and sewer lines, etc., may cross perpentlicular to KMG's pipeline within the ROW. provided that a minimum of eighteen inUes (18'~ of vertical clearance is maintainetl between KMG pipeline(s) and the foreign utility. Any installation by a foreign utility with less than 18' of vertical separation is not allowed without written approval by KMG. In no case will vertical separation be less than 12" whether written or not. Constant line elevations must be maintained across KMG's entire.ROW width, gravity drain lines are the only exception and must be approved in writing. Foreign line crossings below the KMG pipeline must be evaluated by KMG to ensure that a signiflcanl length of the KMG line is not exposed and unsupported during canstmdion. Foreign line crossings above the KMG pipeline with less than 18' of clearance must be evaluated by KMG to ensure that atltlitional support is not necessary to prevent settling on top of the KMG natural gas pipeline. A KMG representative must ce on site during any crossing activhies to verify Uearance depths and 1o assure the integrity and support of the KMG facility. All installations of foreign crossings tlone by boring antl or jacking require the KMG facility to be exposed to verify clearances. • Foreign utilities shall not run parallel to KMG pipelines within the KMG easement without written permission by KMG. A minimum of 10.0 feel of horizontal separation must be maintained in parallel installations whether the foreign utility is placed within the KMG easement or adjacent to the KMG easement. Any deviation from the 18.p' horizontal requirement must be approved in writing by KMG and an'as built survey' provided to KMG after installation. • The foreign utility shoultl be advised that KMG maintains cathodic protection on its pipelines and facilities. The foreign utility must coordinate their cathodic protection system with KMG's. At the request of KMG, foreign utilities shall install (or allow to be installed) cathodic prolecion test leads at all crossings for the puryoses of monitoring cathodic protection interference. The KMG CP technician antl the foreign utility CP technician shall perform post conswction CP interference testing. Interference issues shall be resolved by mutual agreement between foreign utility and KMG. All vests associated with the correUion of cathodic protection interference issues on KMG pipelines as a result of the foreign utility crossing shall be borne by the foreign utility for a period o(one year from date the foreign utility is put in service. • The developer shall understand that KMG whether specifically required per letleral law, or by company standarU, will mark the routing of it's underground facilities with aboveground pipeline markers antl test leads end maintain those markers and test leads. Markers will be installed at every paint the pipeline route changes tlireclion and atlequate markers will be installed on straight sections of pipeline to insure, in the sole opinion of KMG, the safety of the public, wnlractor, KMG personnel and KMG facilities. • On all foreign utility crossings and / or encroachments, metallic foreign lines shall be coatetl with a suilaDle Dipe coating for a distance of al least IO feet on either side of the crossing. Page 1 of 3 Revision 3/07/2004