PERMFILE110055

• Permit No: M1999002
• IBM Index Class Name: Permit File
• Doc Date: 4/20/1999
• Doc Name: TR 1 TO APPLICATION GEOSYNTHETIC LINER SPECIFICATION
• From: AMERICAN SODA
• To: DMG
• Media Type: D
• Archive: No

Kvaerner Meta
The sheet shall be uniform in color, thickness, size. and surface texture. It shall
be free of pinholes, blisters. nodules. contaminants, and other Imperfections. It
shall not contain reclaimed polymers. fillers, plasticizers or extenders. Carbon
black shall be added to the resin for ultra-violet resistance. Additives such as anti-
oxidants. heat stabilizers may be added, as required for manufacturing of the
product.
The surface of the HDPE sheets shall not have striations, roughness. pinhole
bubbles or factory patches. Liner material shall not be folded at any time. The
finish product shall be supplied as prefabricated panels in rolls, custom designed
for this protect so as to minimize field seaming.
The material shall be certified in writing by the manufacturer to meet minimum
property values as specified In this specification.
The HDPE liner shall have a smooth surface and thickness as specified on the
design drawings.
Project No. 306900
General Spec cation No. GC-18
Geosynthettc Liner
The HDPE plastic material shall meet the following minimum property values:
Property
Thickness
Density
Tensile Properties
(each direction)
Strength at yield
Strength at break
Elongation at yield
Eiongatton at break
Modulus of elasticity
Tear Resistance
Value
60 mils
0.940 g/cc
132 ppi
240 ppi
12%
700%
80,000 psi
45 ibs
Test Method
ASTM D 1593
ASTM D1505
ASTM D638
ASTM D882
ASTM D 1004
(Die C)
Puncture Resistance
Hydrostatic Resistance
Low Temperature Impact
Volatile Loss (maximum)
80 Ibs
600 psi
-94°F
0.2%
FTMS 101C
(Method 2065}
ASTM D570
(Method A)
ASTM D746
(Procedure B)
ASTM D 1203
(Method A)
1I~p/°Ml7KNiRUC71GC1q-C OOC. Pw IAI fj Vnrpq~ t~, 1~