Laserfiche WebLink
<br />ROADABLE EQUIPMENT: <br />------------------ Total Ems. Fleet Sixe Haul Trip Return Trip <br />Machine Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />______________________________________________________________SUbtotals :_________f0.00 _________f0.00 <br />MOB/DEMOB SUPPORT EQUIPMENT: ---- ~°°~~~~ <br />sheet 2 of 2 <br />-------------------------- Yeight Ownership Heul Rig Fleet Size Heul Trip Return Trip DOT Permit <br />Non-Roedeble Eqp. Description (tons) Cost/hr Cost/hr (no. hauled) Cost/hr Cost/hr Cost/ee <br />______________________________________________________________Subtotals :_________f0.00 _________f0.00 _______f0.00 <br />Total Eop. Fleet Size Heul Trip Return Trip <br />Roadable Eop. Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />--------------------------------------------------------'-----Subtotals'."----"-f0.00 -""""50.00 <br />EQIIPMENT HAUL DISTANCE 8 TIME <br />______________________________ <br />______________________________ <br />Nearest major city or town within project area region: Colorado Springs <br />Total one way travel distance = 20.0 miles. Average travel speed = 40.00 mph. <br />------ ------------- <br />Job Time - Non Roedeble Equip.= 0.15 hours load Roedable Equip.= N/A hours load <br />0.50 hours haul 0.50 hours haul <br />0.15 hours unload N/A hours unload <br />0.50 hours return 0.50 hours return <br />JOB COST Total Mob/Demob Cost = 5254.47 <br />NOTE: Nan-roadable equipment (haul rip required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one-way enpty return. Roadable equipment (no haul rig required) <br />costs based on one rand trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits ere required for each rig on each loaded trip. <br />Addi tionalLy, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equipment hauling, and loading/unloading times mist be increased substantially for equipment which must be <br />partially dismantled for transport and re-assembled at the job site. Costs for Lifting equipment aM other <br />support equipment needed for this work should be included in the mob/dengb costs. <br />n <br />