Laserfiche WebLink
<br />ROADABLE EQUIPMENT: <br />Machine Description <br />Total Eqp. <br />Cost/hr <br /> <br />Fleet Size Haul Trip <br />(no. hauled) Lost/hr <br />sheet 2 of 2 <br />Return Trip <br />Cost/hr <br />Subtotals 50.00 50.00 <br />MOB/DEMOB SUPPORT EQUIPMENT: <br />------------------------- Weight Dwnership Haul Rig Fleet Size Haul Trip Return Trip DOT Permit <br />Non-Roadable Eqp. Description (tons) Cost/hr Cost/hr (no. hauled) Lost/hr Cost/hr Cost/ea <br />Subtotals 50.00 50.00 50.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Lost/hr (no. hauled) Cost/hr Cost/hr <br />Subtotals f0.00 50.00 <br />EQUIPMENT HAUL DISTANCE & TIME <br />Nearest major city or town within project area region: Delta CO <br />Total one way travel distance = 5.0 miles . Average travel speed = 25.00 mph. <br />Job Time - Non Roadable Equip.= 1.00 hours load Roadable Equip.= N/A hours load <br />0.20 hours haul 0.20 hours haul <br />1.00 hours unload N/A hours unload <br />0.20 hours .return 0.20 hours return <br />JOB COST <br />Total Mob/Demob Cost = 51.951.50 <br />NOTE: Non-roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one~way empty return. Roadable equipment (no haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits are required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equipment hauling. and loading/unloading times must be increased substantially for equipment which must be <br />partially dismantled for transport and re-assembled at the job site. Costs for lifting equipment and other <br />support equipment needed for this work should be included in the mob/demob costs. <br />