Laserfiche WebLink
PART I <br />Page 13a <br />Permit No. COG-850000 <br />• C. REPORTING REQUIREMENTS <br />2. Renortina - Stormwater Annual Aenort (cont.) <br />e) A summary of each comprehensive atormwater facility inspection made, <br />including data, findings, and action taken. <br />d) Results and interpretative o! any stormvatar monitoring performed. <br />The annual report will be due to the Divisive oa or before iebraar= 1S <br />of each year, attar the first full year of coverage under the permit.. <br />The a:act due date for the pers~ittw'^ Brat annual report will be <br />Bated is their permit certification. In no case will as annual report <br />be due before February 15, 1994, unless specifically directed by the <br />Division. The Division reserves the right to require additional <br />information in the report, on a case-by-case basin, as needed. <br />All reports required for submittal shall be signed and certified for <br />accuracy by the permittea (sea Part I.C.7.c). <br />A signed copy of the above report forms shall be submitted to the <br />following address: <br />Colorado Department of Public Nealth and Environment <br />WQCD-PE-82 <br />• 4300 Cherry Creek Drive South <br />Denver, Colorado 80222-1530 <br />3. Reoresentative Semolina <br />Samples and measurements taken as required herein shall be <br />representative of the volume and nature of the monitored discharge. All <br />samples shall be taken at the monitoring points specified in this permit <br />and, unless otherwise specified, before the effluent joins or is diluted <br />by any other wastestream, body of water, or aubetance. Monitoring <br />points shall not be changed without notification to and approval by the <br />Division. <br />4. Analytical and Semolina Methods for Monitoring <br />Analytical and sampling methods utilized by the discharger shall conform <br />to Colorado Regulations for Effluent Limitations (10.1.5), and to <br />regulations published pursuant to Section 304 (h) of the Clean Water <br />Act. <br />The analytical method selected for a parameter shall be the one that can <br />measure the lowest detected limit for that parameter unless the permit <br />limitation or stream standard for those parameters not limited, is <br />within the testing range of another approved method. <br />Calculations for all limitations which require averaging of measurements <br />. shall utilize an arithmetic mean unless otherwise specified. <br />Amended 10/13/94 Effective 11/13/94 <br />