1992-12-16_GENERAL DOCUMENTS - C1980007

Home Browse Search

E. DRY HOLES OR HOLES SEALED IN INTERVALS SHALL BE PERMANENTLY PLUGGED WITH AN EXPANDING PLUG PLACED TEN FEET BELOW GROUND LEVEL FOLLOWED BY SEVEN FEET OF CEMENT. F. THE TOP THREE FEET OF CASING SHALL BE REMOVED AND THE AREA FILLED WITH SOIL DURING FINAL ABANDONMENT. G. WELL COMPLETION DATA AND AQUIFER TEST RESULTS SHALL BE INCLUDED IN QUARTERLY HYDROLOGIC REPORTS SUBMITTED TO THE DIVISION. STATUS: Terminated Stipulation No. 37 MOUNTAIN COAL COMPANY WILL SUBMIT REVISED PAGE 3-35 AND EXHIBIT 3.2.7. 1A AND BOND CALCULATIONS FOR RECLAMATION BY AUGUST 6, 1989. STATUS: Complied With Stipulation No. 38 MOUNTAIN COAL COMPANY WILL INCORPORATE DETAILS OR A REFERENCE TO THE WEED CONTROL PLAN INTO THE PERMIT APPLICATION BY SEPTEMBER 14, 1990. STATUS: Terminated Stipulation No. 39 PRIOR TO THE CONSTRUCTION OF THE COAL STORAGE PAD, A PLAN MAP MUST BE SUBMITTED SHOWING THE PROPOSED TOPOGRAPHY OF THE PAD. THIS MAP MUST SHOW THE LOCATION OF THE CLEAN WATER DITCHES, SEDIMENT DITCHES, AND SEDIMENT TRAP AND CULVERTS. STATUS: Complied With Stipulation No. 40 PRIOR TO DISTURBING THE AREA OF THE STORAGE PAD, MOUNTAIN COAL COMPANY MUST SUBMIT CALCULATIONS TO SHOW THAT THE SEDIMENT POND RECEIVING THE RUN-OFF FROM THE STORAGE PAD IS SUFFICIENTLY SIZED TO HANDLE THE CALCULATED VOLUME OF WATER. STATUS: Complied With Stipulation No. 41 PRIOR TO THE IMPORTATION OF FILL MATERIAL TO CONSTRUCT THE COAL STACKING TUBE PAD, MOUNTAIN COAL MUST SUBMIT BOND CALCULATIONS AND UPDATE THE RECLAMATION PLAN FOR THE REMOVAL OF THE FILL MATERIAL. THE SOURCE OF THE FILL MATERIAL MUST BE IDENTIFIED. IF GOB IS TO BE USED, THIS MUST BE PROPOSED AS A TECHNICAL REVISION AND BE SUPPORTED WITH DESIGNS THAT MEET THE DIVISION'S PERFORMANCE STANDARDS FOR COAL WASTE BANKS. PLANS MUST BE CERTIFIED BY A QUALIFIED ENGINEER. -12-