GENERAL56119 - Laserfiche WebLink

Home Browse Search

~)rs~ kls STATE OF DIVISION OF MINERALS AND GEOLOGY Depamnent of Natural Resources - 1313 Sherman St., Room 215 Denver, Colorado 80203 Document Ima III CD/DVD Phone: (303) 8663567 g• g FAX: 1303) 632At06 REQUEST FORM & INSTRUCTIONS Request for the D~ document images on the following DMG permit. Sle(s): ~~ ~~~ COLORADO c %~~u.z,,.~trc, c The DMG document ima scan be copied to either a t:D or a DVD. Please check one below and return this form with your payment to DMG. If a CD is requested and the permit is too large for a CD, you will be called Please allow up to 5 business days from the receipt of this signed document for your CD or DVD to be available. ~[ CD @ $5.00 per disk _ DVD @ 520.00 per disk Please check if you want a copy of the QuickView installation instructions. COLORADO DIVISION O F MINERALS GEOLOGY AECtANATION•NIN ING tAFET Y•ECIEN CE Bill Owens Governor Russell George Executive Director Ronald W. Cattany Division Director Natural Resource Trustee Computer requirements to use the DMG document imag[ng CD (or DVD): 1. A program called QuickView will be copied to the CD and must be installed on your computer in order to use a DMG imaging CD the first time. Future use of this or other imaging CD's does not require a new installation of the softwaze. 2. The CD or DVD that you purchase must be in the D: drive.. A DVD drive will read a CD or DVD. 3. The CD will contain files with the .tif extension. There needs to be as image viewing application for .tif fdes on your computer that will handle single and multi=page documents. On a Windows XP computer, the default viewing programs are called "Windows Pictttre and Fax Viewer" or "Paint" and they do not work with QuickView. The Imaging Viewer that cornea with pre-Windows XP computers does work. DMG has determined that a program called "IrfanView", which can be downloaded from ItfanView.com, does work with QuickView. After downloading "L-fanView", it needs to be configured as your default .tif viewer. DMG does not support or endorse this softwaze and the licensing and registration are the user's responsibility. There are many other prograts that work as well, such as "Lnaging Preview" and "Imaging for Windows". Instructions• 1. Insert the CD into your computer. 2. Allow time for the CD to install. 3. Eject the CD from the computer. 4. Reinsert the CD into the computer. 5. You are ready to view the Permit Files. NOTE: A program called QltickView Autorun, which runs the QuickV iew setup program, has also been copied to this CD. If the Autorvn program does NOT work, you will need to manually install the QuickView program. Instructions for manually installing QuickView are available upon request with the CD or can be viewed at www.minin¢.state.co.us. The Permit File document images can be viewed in the reception area of the DMG office or they can be purchased on a CD or DVD. The CD/DVD purchase cost covers the time and labor of making the CD. DMG carrot provide comnuter related support. Disclaimer: The Colorado Division of Minerals and Geology (DMG) is no[ responsrble and shall not be liable to the user for damages of any kind arising out of the use of data or information provided by the DMG, including the installation of the data or information, its use, or the results obtained from its use. Any data or information provided by the DMG is provided "as is" without warranty of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particulaz purpose. Data or information provided by the DMG shall be used and relied upon only at the user's sole risk, and the user agrees to indemnify and hold harmless the DMG, its officials, officers and employees from any liability arising out of the use of the datalinformationprpvided. Customer Mailing grad Contact,l'pformation: ~ / ~~ L~ l~C.~ C~ /~-~ti/~_-yg Print Name: Company: Address: Phone: Signature: ~` - .U 6~ ~ ~- DMG use only CD/DVD created and tested by: n Dated "~~ -O ~^ Office of ~ Office of ^ ' '