Laserfiche WebLink
APT Project CMX2453 <br />Test Report, Kiln Stack Emissions (March 24, 2003) <br />CEMEX :Lyons, Colorado -Kiln Stack (Coal Fired Only) <br />PM and HCI Emissions Testing Results, 11/1512002 and 11/22/2002 <br /> Run #1 Run #2 Run #3 Average <br />Date 11/15/02 11/15/02 11/22/02 <br />Start Time 10:36 13:14 11:52 <br />Stop Time 12:01 14:39 13:06 <br />Production Data <br />Kiln Baghouse Inlet Temp. (°F) 521 522 502 515 <br />Alkali Baghouse Inlet Temp. (°F) 485 481 496 487 <br /> NESHAP <br />Kiln Raw Feed Rate {tons per hour) 100.0 100.1 107.0 102.4 Limit <br />Stack Gas Parameters <br />Stack Temp. (°F) 407 407 405 406 <br />Stack Flow {kdscfm) 146.6 155.7 155.5 152.6 <br />02 (%vd) 12.0 12.0 11.0 11.7 <br />C02 (%vd) 13.6 13.8 15.4 14.3 <br />H2O (%vw) 19.0 18.1 18.0 18.4 <br />Isakinetic 101.0 100.8 100.6 100.8 <br />Emissions Data <br />PM (pounds per ton of dry feed) 0.07 0.07 0.13 0.09 0.275 <br />HCI (Iblhr) l~l 0.97 0.98 ND 0.66 <br />For Run #3, the HCI value was below the method detection limit (MDL). The average is of Run #1, Run #2 and <br />half of the method detection limit value of Run #3. Please see A endix 1 for the data reduction results. <br />Table 2.3: Test Results Summary - PM and HCI (Coal Fired Only) <br />page 5 <br />