|
SPECIMEN LABEL
<br />• It is permissible m tteat non-irrigation ditch banks, seasonally dry wetlands,
<br />flood plains, deltas, marshes, swamps, bogs, and transitional areas between
<br />upland and lowland sites. Do nor apply to open water such as lakes, reservoirs,
<br />rivers, streams, creeks, salt water bays, or estuaries.
<br />Avoid Injurious Spray Drift
<br />Applications should be made only when there is little or no hazard from spay
<br />drift. Very small quantities of spay, which may not be visible may seriously
<br />injure susceptible plants. Do not spmy when wind is blowing toward susceptible
<br />crops or omamenml plants near enough to be injured. II is suggested that a
<br />continuous smoke column a[ or near [he spmy site or a smoke genea[or on [he
<br />spmy equipment be used to detect air movement, lapse conditions, or tempeamre
<br />inversions (stable air). If the smoke layers or indicates a potential of hazardous
<br />spmy drift, da nor spray.
<br />Aerial Applieation (Helicopter Only): For aerial application on rights-of--way or
<br />other areas near susceptible crops, use an agriculmrally registered spray thickening
<br />drift control additive as recommended by the manufacturer or apply through the
<br />Microfoil[ boom, Thm-Valve boom, or equivalent drift control system. Thickened
<br />sprays prepared by using high viscosity invert systems or other drift reducing
<br />systems may be utilized if they are made as drift-free as are mixmres containing an
<br />agriculmrally registered thickening agent or applications made with the Microfoil
<br />boom or Thm Valve boom. If a spray thickening agent is used, follow all use
<br />recommendations and precautions on the product label. Do not use a thickening
<br />agent with the Microfoil boom, Thm Valve boom, or other systems that cannot
<br />accommodate thick sprays.
<br />[Reference within this label to a particular piece of equipment produced by or available from
<br />other parties is provided without consideration for use by the reader at its discretion and
<br />subject to the reader's independent circumstances, evaluation, and experfix. Such reference
<br />by Dow AgroSciences is no[ intended as an endorsement of such equipment, shall no[
<br />consumte a warranty (express or implied) of such equipment, and is not intended to imply
<br />that other equipmem is not available and equally suitable. Any discussion of methods of use
<br />of such equipment does not imply that the reader should ux the equipment other than is
<br />advised in directions available from the equipments manufacturer. The reader is responsible
<br />for exercising its own judgment and expertise, or consulting with sources other than Dow
<br />AgroSciences, in selecting and determining how m use its equipment.
<br />With aircraft, drift can be lessened by applying a coarse spmy; by using a spmy
<br />boom no longer than .the rotor length; by spaying only when wind velocities
<br />are low; or by using an approved drift control system. Keep opeating spay
<br />pressures at the Tower end of the manufacturer's recommended pressures for
<br />the specific nozzle type used. Law pressure noules are available from spay
<br />equipment manufacturers. Select nozzles and pressures which provide adequate
<br />plant coveage, but minimize the production of fine spay particles.
<br />Ground Equipment: To aid in reducing spay drift potential when making ground
<br />applications near susceptible crops or other deniable broadleaf plants, Garlon 4
<br />should be applied through large droplet producing equipment, such as the Radian
<br />spayer or in chickened spay mixmres using an agriculmrally registered drift
<br />control additive, or high viscosity invett systems. When using a spay thickening
<br />or inverting additive, follow all use directions and precautions on the product
<br />Label. With ground equipment, spmy drift can be reduced by keeping the spay
<br />boom as low as passible; by applying 20 gallons or more of spray per acre;
<br />and by spaying when wind velocity is low. Do not apply with nozzles that
<br />produce a fine droplet spmy. Keep operating spay pressures at the lower end
<br />of the manufacturer's recommended pressures for the specific nozzle type used.
<br />Low pressure nozzles are available from spay equipment manufacmrers. Setec[
<br />nozzles and pressures which provide adequate plant coveage, but minimize the
<br />production of fine spray particles.
<br />High Volume Leaf-Stem TreatmenC 7o minimize spray drift, keep spays no
<br />higher than brash tops and keep spay pressures low enough to provide coarse
<br />spray droplets. A spray Chickening agent may be used to reduce spay drift.
<br />Grazing and Haying Restrictions
<br />Crazing or barvesting green forage:
<br />1) Lactating dairy animals
<br />Two quarts per acre or Tess: Do not graze or harvest green forage from treated
<br />area for 14 days after treatment.
<br />Greater than 2 to 6 quaffs per acre: Do not gaze or harvest green foage until
<br />the next growing season.
<br />2) Other Livestock
<br />Two quarts per acre or Tess: No grazing restrictions.
<br />Greater than 2 to 6 quarts per acre: Do not gaze or harvest green foage from
<br />treated area for 14 days after treatment. Note: If less than 25% of a grazed
<br />area is treated, there is no grazing restriction.
<br />Haying (harvesting of dried forage):
<br />1) Lactating dairy animals
<br />Do not harvest hay until the next growing season.
<br />2) Other Livestock
<br />Two quarts per acre or less: Do not harvest hay for 7 days after treatment.
<br />Greater than 2 to 4 quarts per acre: Do not harvest hay for 14 days after
<br />treatment.
<br />Greater than 4 quarts per acre: Do not harvest hay until the next growing
<br />season.
<br />Slaughter Restrictions:
<br />Withdraw livestock from grazing treated gass or consumption of (reared hay at
<br />least 3 days before slaughter. This restriction applies to gazing during the season
<br />following treatment or hay harvested during the season following treatment.
<br />Database and format copyright ©bv CRP Press. All rights reserved.
<br />AVAILABLE AT \\~WR'.CREENBOOK.NET 2
<br />Plants Controlled by Garlon 4
<br />Woody Plants Controlled
<br />alder Douglas-fir salt-bush (Broccharis .
<br />amowwood elderberry spp.)
<br />ash elm salt-cedad
<br />aspen gallbetry sassafas
<br />bear clover (bearrnat) gorse scotch broom
<br />beech hazel sumac
<br />birch hickory sweetbay magnolia
<br />blackberry hornbeam swee[gum
<br />blackgum kudzutt sycamore
<br />boxeldert locust tanoak
<br />Bazilian pepper madrone thimbleberry
<br />buckthorn maples tree-of-heaven
<br />cascara mulberry (Ailanrhas)t
<br />Ceanothus oaks tulip poplar
<br />cherry persimmon wax myrtle
<br />chinquapin pine wild rose
<br />choke cherry poison iry willow
<br />cottonwood poison oak winged ehn
<br />Camegus (hawthorn) poplar
<br />dogwood salmonberry
<br />t For best control, use either a basal bark or cut stump Matment.
<br />rr FOr complem control, retreatmrnt may be necessary.
<br />Annual and Perennial Broadleaf Weeds Controlled
<br />black medic goldenrod smartweed
<br />bull thistle ground ivy sweet clover
<br />burdock lambsquarters vetch
<br />Canada thistle lespedeza wild carrot (Queen
<br />chicory matchweed Anne's lace)
<br />clover mustard wild lettuce
<br />creeping beggarweed Oxalis wild violet
<br />curly dock plantain yarrow
<br />dandelion purple loosestrife
<br />field bindweed agweed
<br />Table 1 (Maximum Application Rate): The following mble is provided as a
<br />guide to the user to ach ieve fie proper ate of Garlon 4 without exceeding the
<br />maximum use ate of 8 quarts per acre:
<br />
<br />
<br />Spray Volume Per Acre Quarts of Garlon 4
<br />Per 100 Gallons of Spny
<br />(Not to Exeeed 8 gBAere)
<br />400 2
<br />300 2.7
<br />200 4
<br />100 6
<br />50 16
<br />20 40
<br />IO 80
<br />CJ
<br />APPROVED USES
<br />Foliar Applieations
<br />Use Garlon 4 at rates of 1 [o S quarts per acre [o control broadleafweeds and woody
<br />plants. In all cases use the amount specified in enough water to give uniform
<br />and complete coveage o£ the plants to be conttolled. The recommended order
<br />of addition to the spmy tank is water, spay thickening agent (if used), surfactant
<br />(if used), additional herbicide (if used), and Garlon 4. If a standard agricultural
<br />surfactant is used, use at a ate of 1 to 2 quarts per acre. Use continuous adequate
<br />agitation.
<br />Before using any recommended tank mixmres, read the directions and a6 precau-
<br />tions on both labels.
<br />For best results applications should be made when woody plants and weeds are
<br />actively growing. When hard-tocontrol species such as ash, blackgum, choke
<br />cherry, elm, maples (other than vine or big leaf), oaks, pines, or winged elm are
<br />prevalent, and during applications made during late summer when the plants are
<br />mature, or during drought conditions, use Ne higher ales of Garlon 4 alone or in
<br />combination with Tordon• l0I Mixture herbicide.
<br />When using Garlon 4 in combination with 3.8 pounds per gallon 2,4-D low volatile
<br />ester herbicide geneally the higher rates should be used for satisfactory brush
<br />control.
<br />Use the higherdosage rates when brash approaches an avenge of 15 feet in heigh
<br />or when [he brash covers more than 60% of the area to be treated. If lower ales
<br />are used on hard-to-control species, resprouting may occur the year following
<br />treatment.
<br />On sites where easy to control brash species dominate, rates less than those
<br />recommended may be effective. Consul[ state or local extension personnel for
<br />such information.
<br />Powered by C&V Press.
<br />
|