|
SPECIMEN LABEL UPDATES :1FAIL:1BLE AT N'1i'N'.GREENBOOK.NF.T 7
<br />
<br />
<br />Product(2)
<br />Active Ingredient
<br />Formulaton Amount of
<br />Produm per Acre
<br />Glean + chlorsulfuron+ 2,4-D 75 % DF + 4 4e oz + $Buid oz
<br />2,4-D Amine or Ib/gal
<br />Ester(s)
<br />Hartnony° (Nifrnsulfuron+ 75% DF+4 4s-g oz+8 Buid oz
<br />Eztm+2,4-D tribmuronmethyl)+ Ib/gal
<br />Amine or 2,4-D
<br />Ester(s)
<br />Roundup° glyphosare 3.0 Ib/gal 12-16-fluid az
<br />RT(b)
<br />(q BANVEL may be uud at 6 Buid ounces on fall seeded wheat in Western Oregon as a
<br />spring application only. In CO, KS, NM, OK and TX up [0 8 Buid ounces of BANV EL may
<br />be applied on fall ueded wheat otter it exceeds the 3 leaf stage for suppression of perennial
<br />weeds, such s field bindweed. Applications may be made in the fell following a frost btu
<br />before a killing freeze. BANVEL may be tank mixed with 2,4-D amine at 8 Huid ounces
<br />after wheat begins to tiller. Periods of ex[rnded stress such as cold and wet weather may
<br />enhance the possibility of crop injury. For fall applications only, do not uu if the potential
<br />for crop injury is no[ acceptable.
<br />(2) Do not use low rates of sulfonylurea herbicides, such as Ally, Amber, Express, Finesu,
<br />Glean, and Harmony Extra on more mature weeds and/or on dense vegetative growN.
<br />(3) NOTE: For use on Fall Seeded Wheat ~. Do Not Use unless potential crop injury will
<br />be acceptable.
<br />(4) When using formulations other Nan 4 Ib/gal use pounds active/acre listed.
<br />(5) Use for improved control of Russian thistle, Bixweed, gromwell, maywred end fiddleneck
<br />(b) BANVEL may be applied at 2 Buid ounres wiN Roundup° RT or any glyphou[e
<br />formulation labeled for use as a preplem eppliwdon m small grains wiN no waiting period
<br />prior m planting. Read end follow label direcions of Ne tank mix product for adjuvant use
<br />recommendations.
<br />FALL SEEDED BARLEY
<br />BANVEL MUS7 BE APPLIED TO FALL SEEDED BARLEY PRIOR 70 THE
<br />JOMTDJG STAGE.
<br />NOTE: For spring barley varieties [ha[ are seeded during [he winter months or
<br />later, follow the rates and timings given for Spring Seeded Barley.
<br />~ANK MIX TREATMENTS
<br />ANVEL may be tank mixed with one or more, but not limited to, the following
<br />herbicides. Read and follow the label of each tank mix product used for precau-
<br />tionary stasements, directions for use, weeds controlled and geographic and other
<br />restrictions.
<br />Broadcast rate per treated acre:
<br />Apply 2-0 fluid ounces BANVEL with:
<br />
<br />Product ID
<br />Active logredieot
<br />Formula0on Amount of
<br />product Per Acre
<br />2,4-D 2,4D 4 Ib/gal 8 Buid oz
<br />Amine or Ester (.2516 e.ilAx2)
<br />MCPA MCPA 4 Ib/gal 8-72 Buid oz
<br />Amine or Ester (.25-.37516 a.ilA)
<br />Ally metsulfuron-n¢Nyl 60% DF ~h-o-~6a oz
<br />Amber° triasulfuron 76%DF 0.14-026 oz
<br />Express° thifrnsulfuron+ 75%DF ~hz-4n oz
<br /> [ribenuron-methyl
<br />Finesse° chlorsulfuron+ 75% DF 4s-~6 oz
<br /> metsulfuron-methyl
<br />Glean° chloroulfuron 75% DF 4s oz
<br />Harmony Extm [hitensulfuron+ 75%DF ~h-4a oz
<br /> tribenuron-methyl
<br />Sencor° metribuzin(3) 75%DF 1-10 oz
<br />Bucvil° bromoxynil 2 Ib/gal 1-1 $ pts
<br />Bronam° bromoxynil+MCPA 416/gal $-IKpts
<br />(i) Do not uu low rates of mlfonylureas (Ally°, Amber°, Express°, Finesse°, Glenn°, and
<br />Harmony Extra) on more mnmre weeds and/or on denu vegetative growth.
<br />(2) When using formulations other Nan 4 Ib/gal use pounds active/acre listed.
<br />(3) Herbicides wdN Ne same active ingredient and/or different formulations may be uud.
<br />SPRING SEEDED BARLEY
<br />BANVEL MUST BE APPLIED BEFORE SPRING SEEDED BARLEY EX-
<br />CEEDS THE 4 LEAF STAGE.
<br />.TANK MIX TREATMENTS
<br />BANVEL may be mixed wiN one or more of the following herbicides. Read
<br />and follow Ne label of each tank mix product used for precautionary statements,
<br />directions for use, weeds controlled and geographic and other resMetions.
<br />Broadcast rate per treated acre:
<br />Apply 2-3 fluid ounces BANVEL with:
<br />Dntabasc and format copyright ©Ur Vancc Communication Corpora
<br />Product (1) Active Ingredieot Formulatioo Amount of
<br />ProduM Per Acre
<br />MCPA Amine MCPA 4 Ib/gal 8-12 ^uid oz
<br />or Ester (.25-.375 Ib a.i./AJ(2)
<br />AIIy° metsulfuron-methyl 60%DF yro-Ym oz
<br />Amber° tdasulPoron 75%DF 0.14-0.28 oz
<br />Express Nifrnmlfuron+ 75%DF 4,z-4a oz
<br /> tribrnuron-methyl
<br />Finesse° chlorsulfuron+ 75% DF 4s-45 oz
<br /> metsulfuron-methyl
<br />Glean° chlorsulfuron 75%DF 4s oz
<br />Harmony° thifensulfuron+ 76% DF 46-Va oz
<br />Extra tribenuron-methyl
<br />Sencos metribuzin (3) 75% DF 1-10 oz
<br />Huctril° bromoxynil 2 Ib/gal 1-1 K pts
<br />Bronate° bromoxynil+MCPA 416/gal A"-14z pts
<br />(p Do not vu low rates of sulfonylureas (Ally°, Amhec°, Express, Finesse°, Glean°, and
<br />Harmony° Extra) on more mature wells and/or on drnu vegetatve growth.
<br />(2) Whrn using formulations othtt than 4 Ib/gal use pounds active/acre listed.
<br />(3) Herbicides with the same active ingredient and/or diffttent formulations may be used.
<br />FALL AND SPRING SEEDED OATS
<br />BANVEL MUST BE APPLIED BEFORE SPRING SEEDED OATS EXCEED
<br />THE 5 LEAF STAGE. APPLICATIONS 70 FALL SEEDED OATS MUST BE
<br />MADE PRIOR TO THE JOINTING STAGE.
<br />TANK MIX TREATMENTS
<br />BANVEL may be tank mixed with one or more of the following herbicides. Read
<br />and follow the label of each tank mix product used for precautionary statements,
<br />directions for use, weeds controlled, geographic and other restrictions.
<br />Broadcast rate per treated acre:
<br />Apply 2-0 fluid ounces BANVEL with:
<br /> Amount of
<br />Product Active Ingredient Formulation product Per Aere
<br />MCPA Amine MCPA 4 16/gal 8-12 Buid az
<br />or Ester (.25-.375 Ib a.i./A)(q
<br />(q When using formulations other Nan 4 Ib/gal use pounds active/acre listed.
<br />FALL AND SPRING SEEDED TRITICALE
<br />EARLY SEASON APPLICATIONS
<br />Apply 2-0 fluid ounces of BANVEL to triticale.
<br />Early season applications [o fall-seeded triticale must be made prior m jointing
<br />stage.
<br />Early season applications to spring-seeded tri[icale must be made before [riticale
<br />reaches Ne 6-leaf stage.
<br />TANK MIXES
<br />For best performance, should be used in rank mix combination with bromoxynil.
<br />SUGARCANE
<br />Observe all precautions. Read and follow mixing and application instmetions.
<br />Consult your local or smte authorities for possible application restrictions, es-
<br />pecially concerning aerial applications and advice concerning special local use
<br />situations.
<br />WEEDS CONTROLLED
<br />BANVEL, when applied at recommended rates, will control many ANNUAL,
<br />BIENNIAL and PERENNIAL broadleaf weeds commonly found in sugarcane.
<br />(Refer ro GENERAL WEED LIST).
<br />RATES AND TIMINGS
<br />Application of BANVEL may be made any time after weeds have emerged and
<br />are actively growing but before the close-in stage of sugarcane. Application rotes
<br />and timing of BANVEL are given below. Use the higher level oflisted rote ranges
<br />when treating dense vegetative growth.
<br /> Broadest Rate Per Treated Acre
<br />Weed Stage & Type Product Amouot Lbr. a.i.
<br />Annual
<br />- SmaO, actively growing Uz-1 pt. 4"-~F
<br />- Esmblished weed growN 1-1 K pis. Vz-r/
<br />Biennial 1-2 pts. iF-1
<br />Perennial 2-0 p[s. 1-2"
<br />t4pplication made over Ne top of aRively growing sugarcane may result in mop injury.
<br />When possible, direct Ne spray beneaN Ne sugarcane canopy in order m minimize
<br />the likelihood ofcrop injury. The use of directed sprays will also aid in maximizing
<br />spray coverage of weed foliage.
<br />Retrearmen[s may be made as needed; however, do not exceed a total of 4 pints
<br />(2 lbs. a.i.) of BANVEL per treated acre during a growing season.
<br />non. All rights reserved.
<br />
|