Laserfiche WebLink
30-8U 30-8M <br /> 31-7M 32-7U <br /> 32-7M 32-7L <br /> 33-8U 33-8M <br /> 33-8L <br /> Wells 29-4M, 30-8M, 32-7M, and 33-8M will be sampled once, within 6 <br /> months prior to being mined out, for the full list of parameters. Well 31-7M <br /> will be sampled within one year prior to bond release. Additional wells for <br /> which monitoring is not currently specified will be left open to allow for bond <br /> release monitoring if deemed necessary in the future. <br /> b. The alluvial well (QAL-5) will be monitored quarterly for water level, pH, <br /> conductivity, and temperature, and will be sampled annually for complete <br /> list of water quality parameters. Depth to groundwater is measured <br /> annually during the summer at all bedrock wells. <br /> c. Results from the monitoring are reported to the Division within the Annual <br /> Hydrology Report, to be submitted by February 15, each year. <br /> d. Groundwater quality parameters include: <br /> Field Measurements Laboratory Analysis <br /> Discharge (or level) Ammonia Manganese, Total <br /> pH Bicarbonate Nickel, Total <br /> Specific Conductance Boron Nitrate <br /> Temperature Calcium Potassium <br /> Carbonate Selenium, Total <br /> Chloride Sodium <br /> Copper, Total Sulfate <br /> Fluoride <br /> Iron, Total Total Dissolved Solids <br /> Lead, Total <br /> Magnesium Sodium Adsorption Ratio <br /> 2. Surface water monitoring is currently limited to monitoring required under the <br /> CDPS discharge permit, as necessary to demonstrate compliance with water <br /> quality standards and effluent limitations pursuant to 4.05.2. Additional <br /> surface water monitoring which had previously been required was terminated <br /> pursuant to TR-47, in 1997. <br /> 21 <br />