Laserfiche WebLink
<br /> <br />~~ <br />ROADABLE EQUIPMENT: <br />------------------ Total Eqp. Fleet Size Haul Trip Return Trip <br />Machine Description Lost/hr (no. hauled) Cost/hr Cost/hr <br />___________________________________ <br />General use truck, 20 ton cap. _______________________ <br />E45.00 ________________________________ <br />7 E45.00 _____________ <br />E45.00 <br />Welding truck <br />E25.00 <br /> <br />525.00 525.00 <br />Subtotals : 570.00 E70.00 <br />MOB/DEMOB SUPPORT EOUI PMENT: --------- --------- <br />sheet 2 of 2 <br />--------------------------- Neight Ownership Haul Rig Fleet Size NauL Trip Return Trip DOT Permit <br />Non-ROadable Eqp. Description (tons) Cost/hr Cost/hr (no. hauled) Cost/hr Cost/hr Cost/ea <br />Subtotals 50.00 E0.00 50.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />____..__________________________Subt otals___________50.00 _________E0.00 <br />EQUIPMENT HAUL DISTANCE 8 TIME <br />______________________________ <br />______________________________ <br />Nearest major city or town within project area region: Cortez CO <br />_______________________________________________________ <br />Total one way travel distance = 70.0 miles. Average travel speed = 40.00 mph. <br />Job Time - Non Roadable Equip.= t.00 hours load Roadable Equip.= N/A hours load <br />1.75 hours haul 1.75 hours haul <br />1,00 hours unload N/A hours unload <br />7.75 hours return 1.75 hours return <br />JOB COST Total Mob/Demob Cost = 54,235.27 <br />NOTE: Non-roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one-way empty return. Roadable equipment (no haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits are required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equipment hauling, and loading/unloading times must be increased substantially for equi Anent which must be <br />partially dismantled for transport and re assembled at the job site. Costs for lifting equipment and other <br />support equipment needed for this cork should be included in the mob/demob costs. <br />