Laserfiche WebLink
Page 4 <br />Permit No. 65EP365F <br />Final Approval -Modification-1 <br />Notes to Permit Holder: <br />Colorado Department of Public Health and Environment <br />1). The production or raw material processing limits and emission limits contained in this permit are based <br />on the production/processing rates requested in the permit application. These limits may be revised <br />upon request of the permittee providing there is no exceedance of any specific emission control <br />regulation or any ambient air quality standard. A revised air pollution emission notice (APEN) and <br />application form must be submitted with a request for a permit revision. <br />2). This source is subject to the Common Provisions Regulation Part II, Subpart E, Upset Conditions and <br />Breakdowns. The permittee shall notify the Division of any upset condition which causes a violation of <br />any emission limit or limits stated in this permit as soon as possible, but no later than two (2) hours <br />after the start of the next working day, followed by written notice to the Division explaining the cause <br />of the occurrence and that proper action has been or is being taken to correct the conditions causing <br />said violation and to prevent such excess emission in the future. <br />3). This source is classified as a: Minor source <br />At a : Minor Facility <br />4). The emission levels contained in this permit are based on the following emission factors: <br />Particulate Matter: 0.0265 pound per ton of material handled in transfer point <br />PM,a (particles less than 10 pm): 0.0126 pound per ton of material handled in transfer point <br />Particulate Matter -Fugitive: 0.1361 pound per ton of material extracted /handled <br />PM,p (particles less than 10 pm)-Fug.: 0.0509 pound per ton of material extracted /handled <br />041/0027/004 ver 11/99 <br />