Laserfiche WebLink
ROCON~O I~. <br />EONITE FOR tifAN SCARRED LANDSCAPES <br />4. Varying the uniformity of industrial buildings made of concrete. porous brick. <br />masonry and unglazed the by applying graphics such assimulated petroglyphs, <br />trademarks, lettering and stripes. <br />5. Camouflaging military construction for security and envirorxnental impact <br />which can not be duplicated by conventional means. <br />6. Implementing passive solar, EONITE is used on concrete floors to provide <br />absorbent black color. EONITE can be used for Trombe wall coloration to provide <br />excellent heat production without the maintenance of paints, irealment of <br />concrete on bridges and driveways also helps to provide de-icing on such <br />surfaces. Coloration of the entire concrete bridge structure blends bridges and <br />overpasses with the natural surroundings in visually sensitive areas such as <br />national parks. <br />7. Coloring of concrete while in mixing stage with benefit of solubility as opposed to <br />floating nature of oxide dyes. Additive feature of EONITE coloring to intensify color <br />makes rework andjor later repairs a practical matter in comparison to oxide dyes. <br />MATERIAL SUF'FACES: <br />1. EONITE is successfully applied to igneous and metamorphic rock surfaces such as <br />basalis, andesites, c3ranites, shales, schists, etc. Naturally, only solid rock outcrops <br />and stable pieces should be treated as loose or readily decaying rocks or <.lopes <br />will not be permanent. <br />2. Concrete and masonry surfaces and products (must bs wettable-see surface <br />criteria 'oelow). <br />3. Unglazed file and porous brick products using the same surface criteria as <br />concrete and masonry products. <br />SURFACE PREPARATION AND CRITERIA: <br />1, Normally washing is unnecessary. Surface substrates should be clean a.s surface <br />contaminates will absorb EONITE and blow or wash away giving non-uniform <br />results. Often high pressure water washing is sufficient to remove excess loose <br />surface debris. If sample testing shows more variation in color from porosity <br />differences or stains and streaks, then sand-water blasting may be needed to <br />prepare the surface. <br />2. AVOID non-water wettable paint or curing compounds on the surface substrate <br />as the product will not perform. <br />ALWAYS TEST A SMALL AREA FIRST TO DETERMINE ACCEPTANCE OF EONITE TO THE <br />SURFACE AND DILUTION CRITERIA. <br />EONITE PRECONDITIONER APPLICATION: <br />1. Apply EONfiE Preconditioner fulr strength before application of arn/ EONITE <br />COLOR CONDITIONER product. <br />