Laserfiche WebLink
.. <br />- ~~ <br /> <br />Debris and slash in excess of 1 foot in length and 3 inches in diameter, shall be <br />removed from the backslopes, ditches, and roadway. All debris and slash must be <br />removed from the roadbed. <br />5. Removal of Veeetatiou <br />a. Brush, trees, and limbs shall be removed to provide a 5 foot distance beyond the <br />travelway. <br />The travelway shall be free of encroaching limbs to a height of 16 feet above the <br />travelway surface. <br />Brush and trees shall be cut parallel and as close to the ground as practical. <br />Slash shall be scattered downslope, outside the roadway and drainage way. <br />6. Slumas, SlouHlts, and Slides <br />a. Minor, sloughs, slides and slumps, less than 5 cubic yards per 100' station, shall be <br />removed or repaired. Sloughs, slides, and slumps greater than 5 cubic yards per 100' <br />station should be referred to the District Ranger. <br />Minor slough and slide removal, including soil, rock, and vegetative matter which <br />encroaches onto the ditches, roadway, or shoulder, shall be removed and disposed of <br />adjacent to the site. <br />The slope which generated the slide material shall be reshaped to remove overhangs <br />or loose material. <br />Minor slumps, including washouts, shall be filled with material generated from the <br />immediate area or from agreed upon locations or borrow sites. Material shall be <br />placed in layers and be compacted by operating equipment over the full width of each <br />layer. <br />7. Bladin¢ <br />a. The roadbed shall be crowned or sloped to conform to the original prism. All berms <br />shall be removed from the roadway shoulders to the maximum extent possible and <br />incorporated in the roadway except those that are specifically designed to remain. <br />Berms of material caused by road maintenance operations will be removed from the <br />roadway prior to the end of each day's work and not left in place overnight, on <br />weekends, or holidays. <br />