Laserfiche WebLink
Specifications for the Construction of the Shores Resource Slurry Wall," dated <br />January 2003). <br />1. Item 1.01 of section 01010 of division 1 of the specifications should be <br />changed to include units (linear feet) for the "20,000 of slurry wall" to be <br />installed. <br />2. Item 1.02 of section 01300 of division 1 of the specifications should be <br />changed to include units (centimeters per second) for the maximum <br />permeability of the soil-bentonite backfill. <br />3. n Table 1 included with [he specifications, change the specified value for sand <br />content in the slurry to state "sand content less than 20 percent by volume." <br />Hall-Irwin Coporation shall submit a map to the Division that identifies the buffer zone <br />specified in the pazties' surface use agreement for the Kerr-McGee oil and gas well <br />identified as KM BLCS-lA. <br />The estimated liability amount has been increased by the approval of the amendment by $2,079,640.00. If you <br />have not already done so, please submit additional bond in the amount of $2,079,640.00 for a total bond of <br />$2,653,640.00. The revision will not be final until the bond is approved by the Division. <br />If you have any questions, please contact me. <br />Sincerely, <br />,~~~-~ . <br />Gregg R. Squire <br />Environmental Protection Specialist <br />cc: Bazb Chiappone, Division of Minerals and Geology <br />Dana Ortiz -Tetra Tech <br />1900 S. Sunset St., Ste. 1-F <br />Longmont, CO 80501 <br />M:bss\rddUEMNM-RV-02_M1998013_GRS_20030331_I11932 AM.doc <br />