Laserfiche WebLink
Mr. Roy A. Kazo <br />January 10, 2006 <br />Page 5 <br />permit document under Cover and Production, could be amended to state, <br />"The rationale for the factor of 2x...is explained in Appendix 13-14". <br />8. The SHRUB EVALUATION SECTION of the appendix contains a description <br />of the approach to be employed to establish revised woody plant density standazds <br />applicable to BRB-1, BRB-2, and BRB-3, as well as woody plant density <br />sampling, evaluation, and testing methods to be applied to these bond release <br />blocks. The conceptual approaches are in line with previous discussions between <br />DMG and SCC staff. However, before this technical revision application can be <br />approved, the section needs to be "fleshed out" by inclusion of the necessary <br />"high density" (minimum 1000 stem per acre) shrub patch mapping, and specified <br />minimum aerial percent of BRB-3 to be comprised ofhigh-density patches. In <br />addition, woody plant density standards applicable to BRB-4 and BRB-5 blocks <br />will also need to be addressed. <br />Please address these concerns and provide new or amended text and <br />mapping as appropriate. <br />If you have any questions please contact me at (303) 866-4936 or Dan Mathews at <br />(970)242-5025. <br />Sincerely, <br />M~c~,Qp <br />Michael P. Boulay <br />Environmental Protection Specialist <br />C: Sandy Brown <br />Dan Mathews <br />