Laserfiche WebLink
<br />DIVISION 1 -GENERAL REQUII2EMENTS <br />SECTION 01700 -CONTRACT CLOSEOUT <br />1.O1 CLOSEOUT PROCEDURES <br /> <br />The following project closeout procedure defines the responsibilities of the Convactor, Owner and <br />Engineer in closing the project: <br />Step 1: Contractor advises the Engineer in writing that he has reached <br />"Substantial Completion" and provides a list of items to be completed or <br />cortected. <br />Closeout may be conducted by areas or portions of the work if requested by the Owner <br />Step 2: Engineer observes the work to determine if it is substantially complete, and issues a "Punch List" of <br />items to be completed or cortected. <br />Step 3: Contractor completes and/or cortects all punch list items and notifies [he Engineer in writing that <br />his work is ready for final inspection. <br />Step 4: Engineer makes final examination. When the work is found to be acceptable, the Engineer will <br />prepare a final construction report and as-built plans. <br />END OF SECTION <br />Ol/99 Section O 1700 -Page 1 of 1 <br />