Laserfiche WebLink
<br />ITEM REFERENCE PURPOSE COMPLIANCE? <br /> pond at water levels feature, this is not <br /> (the capability to technically an as-built item, <br /> accommodate design but needs to be identified <br /> runoff). somewhere in the Permit. <br /> Ofen provided in a <br /> SEDCAD or equivalent <br /> demonstration. It is <br /> presented in the SEDCAD <br /> run. <br />Maximum level of 4.05.6(3)(6) This is a design OK Preferred on the as- <br />sediment storage feature that built. as a performance <br /> demonstrates that the feature. This is not <br /> pond has the technically an as-built item, <br /> capability to store but needs to be identified <br /> sediment and still somewhere in the Permit. <br /> meet other Often provided in a <br /> requirements. SEDCAD or equivalent <br /> demonstration. It is shown <br /> as 6078.01 in the SEDCAD <br /> demonstration and Figure 4. <br />Other features, such None indicated. <br />as filter blankets, <br />drain blankets, etc. <br />Other features, such None indicated. <br />as walkways, ladders, <br />bafFles, etc. <br />Other: Elevation 4.05.6(12) 20' ttueshold. OK. Emergency spillway <br />difference of the invert @ 6080.3 minus <br />upstream toe-of--slope bottan of pond at 6078 = <br />and invert of the 2.3'. 2.3' < 20'. <br />emergency spillway <br />