REV91229 - Laserfiche WebLink

Home Browse Search

ROADABLE EQUIPMENT: ----^------------- To[al Eqp. Fleet Size Haul Trip Return Trip Machine Description Cost/hr (no. hauled) CostJhr Cost{hr 12 - [8 yd dump truck E63.95 1 E63.95 E63.95 Subtotals E63.95 E63.95 MOB/DEMOB SUPPORT EQUIPMENT: --------- --------- sheet 2 of 2 --------------------------- Weigh[ Ownership Haul Rig Fleet Size Haul Trip Return Trip DOT Permic Non-Roadable Eqp. Description (tons) Cost/hr Cost/hr (no. hauled) Cost/hr Cast/hr Cost/ea Subtotals E0.00 E0.00 E0.00 Total Eqp. Fleet Size Haul Trip Return Trip Roadable Eqp. Description Cost/hr (no. hauled) Cost7hr CostJhr ----------------------------------------------------------------------,------'----- ---------------- Subtotals 50.00 E0.00 EQUIPMENT NAUL DISTANCE & TIME Nearest major city or town within project area region: Paonia Total one way travel distance = 70.0 miles. Average travel speed = 45.00 mph. Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= N/A hours load 0.22 hours haul 0.22 hours haul 0.50 hours unload N/A hours unload 0.22 hours return 0.22 hours return JOB COST Total Nob/Demob Cost = E1,859.67 NOTE: Non-roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip consisting of a one-way loaded haul and a one-way empty return. Roadable equipment (no haul rig required) costs based on one round trip. Colorado DOT requires special permits for oversize equi Anent on certain specified road segments within the State. Separate permits are required for each rig on each loaded trip. Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize equipment hauling, and loading/unloading times must be increased substantially for equi Anent which must be partially dismantled for transport and re-assembled at the job site. Costs for lifting equipment and other support equipment needed for this work should be included in the mob/demob costs.