Laserfiche WebLink
1 <br />listed as 0.04 mg/L in N.J.A.C. 7:9-6.1 et seq., Table 3, given in <br />Appendix F. <br />' No precision or accuracy data are given for the autoanalyzer, USEPA <br />Method 9012. Based on the data from Appendix G and project <br />experience in the western United States, PQL values are likely to <br />be similar to the manual USEPA Method 9010. <br />' 6.6 Reoortine <br />Unless there is insufficient sample for any water quality analysis <br />to be performed (as in condition 1, Section 6.1), then the <br />' analytical laboratory will produce a report which compE'ises: <br />(i) A statement of the laboratory test results, And <br />(2) A quality assurance report. <br />' The report will be prefaced by a sheet which identifies the <br />' analytical laboratory, the laboratory job number, the client and <br />the date of the report. Certification is provided by the inclusion <br />' of this page which will be signed and dated by an authorized <br />representative of the analytical laboratory together with their <br />title. <br />1 <br />6.6.1 Analytical Results Report: The analytical test results will be given <br />' on laboratory data sheets which contain the following information: <br />' (1) The date of the report and the laboratory performing the <br />analysis; <br />' (2) The client identification number, the name of the client <br />' and the laboratory identification number; <br />' -4Q <br />1 <br />