Laserfiche WebLink
<br />10. The third party sampling contractor shall document its compliance with <br />the approved TR-006 protocol. <br />D. Reports <br />1. A summary report will be prepared subsequent to the cpmpletion of <br />each sampling event and the receipt of the analytical results from the <br />chosen laboratory. <br />• <br />2. The summary reports will include a summary of the sampling activities, <br />sampling observation documentation, "chain of custody" dowmentation, <br />the verbatim analytical results from the laboratory, with comments on <br />unusual or unexpected results, and recommendations for minor <br />sampling changes, if indicated by the analytical results. <br />E. Malysis o[ Samples <br />1. Samples collected hereunder shall be analyzed by the independent <br />analytical laboratory designated by DMG for the following parameters: <br />Total Cyanide, WAD Cyanide and Copper in accordance with the <br />approved analytical protocol set forth in T'R No. 006. <br />2. In accordance with the approved TR No. 006 protocol, "fifrld blanks", <br />"rinse blanks", and "duplicate samples" will be submitted for analysis by <br />the third parry sampling contractor, at the contractor's discretion, with <br />the concurrence of the DMG project manager. <br />3. If analytical interferences are suspected to exist, the third parry <br />sampling contractor may direct the analytical laboratory rto perform <br />analysis for additional parameters, with the concurrence of the DMG <br />project manager, after notification of BMRI. <br />F. Submittal of Invoices <br />1. The Contract for Environmental Sampling Services rewires that <br />invoices be submitted to DMG's project manager. <br />2. The DMG project manager shall review and approve the invoice(s), <br />and return said invoice(s) to the third party sampling contractor with <br />comments for possible revision. <br />-5- <br />