Laserfiche WebLink
Groundwater Monitoring: <br />Bear Creek drainage - OMLLC monitors one lower alluvial monitoring well and one <br />deep Somerset mine workings well. <br />Elk Creek drainage - OMLLC monitors three alluvial wells located near the OMLLC <br />surface facility. <br />Hubbard Creek drainage - OMLLC monitors one deep Somerset mine workings well. <br />All monitor wells aze sampled for static water level and field parameters twice during <br />June through October. A laboratory sample is collected from each monitoring well during <br />the third quarter. <br />The 2003 reassessment of the hydrologic resources in the Elk Creek lease may result in <br />the inclusion of additional hydrologic monitoring points. If appropriate, the additional <br />points will be added to the OMLLC Monitoring plan and reported in the AHR. <br />PHASE II <br />Phase II Inventory <br />The United States Forest Service (USFS) forest planning documents include range <br />improvement information listing a number of ponds located in the lease azea. USFS <br />information also indicates a number of water rights filings for stock ponds in the Elk <br />Creek lease. This information is not confirmed by inclusion in the corresponding CDWR <br />records. <br />A review of the USFS information reveals inconsistencies with legal descriptions of the <br />pond locations and inconsistencies with the legal description versus the locations shown <br />on USFS supplied maps. <br />Because of the inconsistencies with the USFS information (which dates back to the <br />1960's and 1970's), OMLLC has committed within the CDMG permit Exhibit 2.05-E7 <br />(also Appendix 4 herein), to conducting a field reconnaissance during the summer of <br />2003 to reassess and or reconfirm the information relative to the existence of these ponds <br />and any associated major springs or seeps located within the Ells Creek lease area on <br />USFS lands. The condition and status of the hydrologic features (field parameters, water <br />source and estimated flow volumes, condition and size of structures or improvements, <br />etc.) will be updated and tabulated for inclusion into the CDMG permit. <br />When compared to the areas planned to be mined, it is important to note that the <br />overburden thickness beneath these USFS features ranges from 1775 feet to 2475 feet. <br />Because of the high cover above the longwall panels, no adverse impacts to these <br />. hydrologic features are predicted due to mining activities. In addition, longwall mining <br />under these USFS areas are not planned until 2009. <br />