Laserfiche WebLink
<br /> <br />A few typographical problems that need to be cleazed up prior to approval of these revised pages <br />include: <br />3) The Table shown on Page 2.05-17a identifies the sample collected at 12-24" depth in the <br />NW quadrant as a Loam. This should be corrected to "Silt Loam" based upon the particle <br />size distribution results and compazison to the Soil Textural Triangle. Additionally, the <br />SE quadrat 12-24" depth and 24-36" depth should be "Silt Loam" as well. <br />4) Page 2.05-17 submitted with this revision only has text on one side of the page. The <br />currently approved permit page (revised 9/19/95 MR-73) is a two-sided page with page <br />2.05-18 on the back side. As submitted, the pages 2.05-17 and 17a do not fit smoothly <br />into [he permit. <br />5) Proposed permit page 2.05-17 states that, "Each additional foot of topsoil shall be <br />equivalent to 1.5 feet of subsoil." The Division cannot accept this statement without <br />additional demonstration that less than 4 feet of cover on the Coal Processing Waste <br />Disposal Area would be in compliance with Rule 4.10.4(5). Should Basin replace more <br />than one foot of topsoil at the Waste Disposal Area the total thickness of cover will still <br />need to meet the 4-foot requirement. <br />Please contact me should you have any further questions. <br />m:\coal\shaze\c81013tr.43a <br />