Laserfiche WebLink
YOUR NEW PRESSURE-VACUUM SOIL WATER SAMPLER <br />Unpacking Remove all packing materials and check the Soil Water Sampler <br />for any damage that may have occurred during shipment. <br />If the Sampler is damaged, call the carrier immediately to report <br />it. Keep the shipping container and all evidence to support your <br />claim. <br />Assembly The standard 1920F1 Pressure-Vacuum Soil Water Sampler was <br />assembled prior to shipment. <br />If you purchased the 1920F1K1 Pressure-Vacuum Soil Water <br />Sampler Kit because your application requires you to clean the <br />sampler before installation, we have shipped the Sampler partially <br />assembled. The porous ceramic cup has been bonded to the PVC <br />tube (tube assembly) and the dip tube has been bonded to the top <br />cap (top cap assembly). You must assemble the Sampler as fol- <br />lows. <br />The 1920F1K1 Sampler is assembled after cleaning by glueing <br />the top cap assembly to the tube assembly. Dip a Q-tip or pipe <br />cleaner into the separately purchased Epoxy (part no. 0980V ).The <br />Epoxy Kits can be purchased in three sizes: 4 oz; 16 oz; or 32 oz. <br />depending on your needs. Apply a thin layer to both the inside of <br />the tube assembly where the top cap is inserted and to the outside <br />area of the top cap assembly where it fits into the PVC tube. Insert <br />the top cap assembly into the tube assembly and let the freshly <br />glued Sampler sit for 24 hours to allow the glue to harden com- <br />pletely Once the glue has set, the Sampler is ready to test for leaks <br />(see page 9, "Pressure Testing Before Installation" for further de- <br />tails). <br />All other accessory items necessary for proper use are discussed <br />later in these instructions and are listed on page 16. Please read <br />all instructions thoroughly before installing the Sampler. To as- <br />sure optimum cleanliness of the assembly, no grease or organic <br />solvents have been used in its manufacture. <br />Not Liable for Improper Use Soilmoisture Equipment Corp. is not responsible for any damage, <br />actual or inferred, for misuse or improper handling of this equip- <br />ment. The Pressure-Vacuum Soil Water Samplers, Models 1920F1 <br />and 1920F1K1, are to be used solely as directed by a prudent indi- <br />vidual under normal conditions in the applications intended for <br />this equipment. <br />SOILMOISTURE EQUIPMENT CORP. 7 <br />P.O. Box 30025, Sonto Borboro, Colilornio 93105 USA <br />Phone: 18051 964-3525 • Fox: (805) 683-2189 <br />e-moil soles~soilmoisture.<om ~ Web: hHp: //wwwsoilmoislure.com <br />SOILMOISTURE <br />