Laserfiche WebLink
^ All initial and continuing calibration blanks (ICB/CCB) associated with each <br />applicable analytical batch were below the reporting limit for the requested <br />analytes. <br />^ All initial and continuing calibration verifications (ICV/CCV) associated with <br />each applicable analytical batch were within the acceptance criteria for the <br />requested analytes. This indicates a valid calibration and stable instrument <br />conditions. <br />8. Matrix specific quality control procedures. <br />Sample 0612111-3 was designated as the quality control sample for the pH, <br />specific conductance, and TSS analyses. Per method requirements, matrix QC <br />was performed for the chloride and sulfate analysis. Since a sample from this <br />order number was not the selected quality control (QC) sample, matrix specific <br />QC results aze not included in this report. <br />Similazity of matrix and therefore relevance of the QC results should not be <br />automatically inferred for any sample other than the native sample selected for <br />QC. <br />^ A sample duplicate was prepazed and analyzed with the pH, specific <br />conductance, and TSS batches. All guidance criteria for precision weze met. <br />9. It was necessary to dilute the samples in order to bring the chloride and/or sulfate <br />concentrations into the analytical range of the ion chromatograph (IC). <br />10. Manual integrations are performed when needed to provide consistent and <br />defensible data following the guidelines in Pazagon Analytics Standard Operating <br />Procedure 939 Revision 2. <br />The data contained in the following report have been reviewed and approved by the <br />personnel listed below. In addition, Paragon Analytics certifies that the analyses reported <br />herein are true, complete and correct within the limits of the methods employed. <br />~~• _l~_ <br />Eric A. Lintner Date <br />Inorganic Analyst <br />Yvl l Z D`l <br />Reviewer's Initials Date <br />