HYDRO31096

• Permit No: C1980005
• IBM Index Class Name: Hydrology
• Doc Date: 4/8/1996
• Doc Name: 1st Qtr 1996 Inspections
• From: SENECA COAL CO
• To: DMG
• Permit Index Doc Type: SEDIMENT POND INSPECTIONS
• Media Type: D
• Archive: No

r
PERIODIC INSPECTION PORM
Water, Sediment, or Slurry Impoundments
INSPECTOR'S NAME: Dennis Jones DATE: 03/18/96
NPDES I.D. NO.: CO-0000221 D.P. 008
FACILITY CONFIGURATION: Cross-Valley Pond DATE LAST INSPECTION: 12/04/95
SITE NAME: pond #008 LOCATION: SWS: NWT/.. Sec. 7. TS N. R86W
MINE NAME: Seneca II Mine (Seneca Coal Col LOCATION: 7.1 mi. S of Hayden. CO
MINE I.D. NO.: CMLAD Permit No. C-80-005 OWNER'S REP.: Brad Brown. Gen Mor
Circle or write in aoorovriate resaonse
1
2
3
4
5
6
7.
8.
9.
10
11
12
13
14
15
16
17
18
19
20
Foundation preparation (removal of vegetation, stumps, topsoil: Yes
Lift thickness: 1
Compaction according to approved plan: es
Burning (specify extent and location): Yes
Angle of slope: 3:1 upstream, 3:1 downstream Total =
*Seepage (specify location, color, and approximate volume)
From underdrain pipes:
At isolated points on embankment slopes:
At natural hillside:
Over widespread areas:
From downstream foundation area:
"Boils" beneath stream or ponded water:
Cracks or scarps on crest:
Cracks or scarps on slope:
Sloughing or bulging on slope:
*Major erosion problems:
Surface movements in valley bottom or on hillside:
*Erosion of toe:
*Water impounded against toe:
Existing embankment freeboard: See comments
~_ Increase Decrease in water level:
Cracks, bulging, or erosion on upstream face:
Visible sumps or sinkholes in slurry surface:
*Clogging
Spillway channels and pipes:
Decant system:
Diversion ditches:
*Cracking or crushing of pipes
Spillway pipes:
Decant system:
Trash racks clear and in place:
No N/A
_2` in. N/A
No N/A
No
6:1 N/A
Yes N/A
Yes A
Yes N N/A
Yes N N/A
Yes o N/A
Yes o N/A
Yes N N/A
Yes N/A
Yes o N/A
Yes o N/A
Yes o N/A
Yes N/A
Yes No N/A
7.0 feet
1.0 feet
Yes ~ N/A
Yes No
Yes No N
Yes No
Yes No A
Yes Qo N
Yes No /A
es No N/A
*Major adverse changes in these items could cause instability and should be reported to the
Engineering Manager and Mine Superintendent for further evaluation. Adverse conditions noted
in these items should normally be described (extent, location, volume, etc.) in the space on
the back of this sheet.