Laserfiche WebLink
MATERIAL SPECIFICATION <br />AM~ N P300 <br />GREEN' <br />The P300 permanent turf reinforcement mat shall be amachine-produced mat of 100% LTV stable polypropylene fiber. <br />The matting shall be of consistent thickness with synthetic fibers evenly distributed over the entire area of the mat. The <br />matting shall be covered on the top with black heavyweight LJV stabilized polypropylene netting having ultraviolet <br />additives to prevent breakdown and an approximate 0.50 x 0.50 inch (1.27 x 1.27 cm) mesh size. The bottom net shall <br />also be UV stabilized polypropylene, with a 0.625 x 0.625 inch (1.57 x 1.57 cm) mesh size. The matting shall be sewn <br />together on 1.50 inch (3.81 cm) centers with UV stabilized polypropylene thread. <br />The P300 shall meet requirements established by the Erosion Control Technology Council (ECTC) Specification and <br />the U.S. Department of Transportation, Federal Highway Administration's (FI-IWA) Standard Specifications For <br />Construction of Roads and Bridges on Federal Highway Projects, FP-03 2003 Section 713.18 as a Type SA or B <br />Permanent TurjReinforcement Mat. <br />The P300 is also available upon request with the DOT SystemT'". The DOT System''M consists of installation staple <br />patterns clearly marked on the erosion control blanket with environmentally safe paint. The blanket shall be <br />manufactured with a colored line or thread stitched along both outer edges (approximately 2-5 inches [5-12.5 cm] from <br />the edge) to ensure proper material overlapping. <br />The turf reinforcement mat shall be P300 as manufactured by North American Green, or equivalent. <br />The P300 permanent erosion control/turf reinforcement mat shall have the following properties: <br />Material Content <br />Matrix 100% UV Stable Polypropylene Fiber <br /> (0.70 lb/yd~) (0.38 kg/m~) <br />Netting Top side heavyweight LJV stabilized <br /> (5.0 lbs/1,000 ft' [2.44 kg/700 m'] approximate weight) <br /> Bottom side heavyweight UV stabilized <br /> (3.0 lbs/1,000 ft2 [1.47 kgl100 mz] approximate weight) <br />Thread 100% Black Polypropylene <br />P300 is Available with the Fallowing Physical Specifications Per Roll [English Units (Metric Units)] <br />Width 6.67 ft (2.03 m) <br />Length 108.0 ft (32.92 m) <br />Weight t 10% 61.0 Ibs (27.66 kg) <br />Area 80.0 yd' (66.89 m') <br />Roll Widths Also Available Upon Special Request <br />Width 8.0 ft (2.43 m) 13.3 ft {4.05 m) <br />Length 112.5 ft (34.29 m) 108.0 ft (32.92 m) <br />Weight t 10% 18.45 Ibs (35.58 kg) 122.401bs (55.52 kg) <br />Area 100 yd' (83.61 m~) 160.0 yda (133.78 m~) <br />Stitch Spacing for All Rolls = 1.50 inches (3.81 cm) <br /> Updated 12007 <br />