Laserfiche WebLink
c~LBCNO Enkamat 7010142M <br />• Root Reinforcement Mat <br />Description Enkamat® 7010 is athree-dimensional turf reinforcement mat (TRM) made of continuous <br />monofilaments fused at their intersections. Ninety-five (95%) percent of the Enkamat is <br />open and available for soil, mulch and root interaction with filaments, creating the most <br />effective Root Reinforcement Mat (R2M) available. Enkamat is manufactured from nylon <br />to eliminate the buoyancy factor associated with submerged conditions and provide per- <br />manent TRM protection in vegetated channels as well as on slopes. <br />Recommended • Permanent erosion control for Green (vegetated) channels with expected shear <br />Applications stresses s 8 psf. <br />• Permanent erosion control for slight to moderate slopes (<_ 2.SH:1V). <br />• Support and enhance performance of Ecosystem plants. <br />• Substrate for hydraulically applied Bonded Fiber Matrix (BFM) and other mulches for <br />erosion control applications where low water flow and low to moderate shear stresses <br />are expected <br />Technical Data ;MechanicalP,roperties`` `=.T_estMetFiod; _ .",Units' r Typlcal,RolLValue"'I', <br />MD CD <br />Tensile Stren th ASTM D 5035 kN/m (Ibs/ft) 2.3 (160) 1.2 (80) <br />9 r.....a;ava~ <br />Thickness ASTM D 5199 mm (in) 10 (0.4) <br />Mass/Unit Area ASTM D 5261 g/m2 (oz/yd2) 271 (8.0) <br />ASTM D G53 I % stren <br />th <br />UV Stability ASTM D 5035 <br />,__~;~_„ g <br />80 <br />retained <br />Packaging Data <br />i,Pertormance Properties` , . Test Method' ;'-' t7nlt§_;~ " , „ Typfcal'RoI1,Value ilk <br />Permissible Velocity <br />Product Only Fiume test' m!s (ft/s) 6.1 (20) <br />30 minute, vegetated Flume test' m/s (ft/s) 5.8 (19) <br />50 hour, vegetated Flume test' m/s (ft/s) 4,2 (14) <br />Permissible Shear Stress <br />Product Only Flume test' kN/m2 (Ibs/ft2) 0.32 (6.7) <br />30 minute, vegetated Flume test' kN/m2 (Ibs/ft2) 0.38 (8.0) <br />50 hour, vegetated Flume test' kN/m2 (Ibs/ft2) 0.29 (8.0) <br />1. Flume test pedormetl et intlepentlenl laboratory-dale and tlatails evailatNe upon request. <br />Physical Properties ;Units - Nominal Value. "`. <br />Colbond Inc. <br />PO Box 7057 <br />Enka, NC 28728 <br />Tel 800-365-7391 <br />Fax 828-665-5009 <br />www.colbond-usa.com <br />Roll Dimensions m 0.99 x 152 1.93 x 27.5 <br />(width x length] (ft) (3.25 x 500) (6.33 x 90) <br />Roll Area m2 (yd2) 150 (180) 53 (63.3) <br />Estimated Roll Diameter cm (in) 111 (44) 48 (19) <br />Estimated Roll Weight kg (Ib) 42 (92) 15 (32) <br />To the best our knowledge, the infortnalion contained herein is accurate. However, Colbond Inc. cannot assume eny liabil- <br />ity whatsoever (or the eccurzry or completeness thereof. Final determination or the suitability of eny information or material <br />(or me use contemplated, of its manner of use end whether the suggested use infringes any patents is Ne sole responsibil- <br />ity of the user. Colbond Inc. 20040 <br />0912004 <br />CIV7010TDS03 <br />